Tuning Fx Crown MKII ????

[blacksmith304]

I got stuck out in the rain lastnight, i took my rifle apart to ensure I got it clean and dry. I took everything apart minus the plenum plug, and the bottle adapter. Re assembled and now it is "bleeding" air out of the tranfer port at full steam ahead. Almost like there is no reg installed. The reg is in. Humma gen 3 with 9 washers stacked according to their instructions. Any help is appreciated. Cheers

 

[Scotty1]

Try cocking the gun before filling, safety on, pointed in a safe direction. 

 

[Glem.Chally]

You sure the valve is seated correctly? I'd look there first. 

 

[blacksmith304]

So cocking first=no go. I have taken the valve out and in 3 times, how do i ensure its seated correctly?

 

[Solo1]

never had a crown but the huma reg for my maverick uses 11 bouble check your washers?

 

[blacksmith304]

According to huma gen 3 reg, extra high pressure setting is 9 springs. Figure 8 of their instructions for impact/crown. I did mire research and found a video that shows how to fix a leak. It seems to me that my valve seat may be damaged. Gonna order a new one. Hopefully it helps