I believe what that is talking about is the shroud not the barrel. I know others have actually measured there barrels and confirmed the barrels are 380mm for the .177/.22 and 480mm for the .25.
Upvote 0
FX dreamline power plenum
- Thread starter Macipod
- Start date
I believe what that is talking about is the shroud not the barrel. I know others have actually measured there barrels and confirmed the barrels are 380mm for the .177/.22 and 480mm for the .25.
Upvote 0
Great thread guys. I've been trying to sort out how to make the .22 compact work too. I really want one, but the barrel shroud and bottle size is a deal breaker. Most of us are going to put a moderator on it so I'd give the minimal dampening. The other issue I have is bottle size, at 180cc it's too small. Having a .25 Wildcat, I really want a higher shot count. I've found a couple of CF bottles on ebay that might work for the Compact .22. I'm probably optimist to think either of those bottles will work with a moderator at the end of the 380mm barrel.
FX really need to provide more barrel options for the Lego gun. I may have to go with the Tact with 500mm barrel and 480cc cf tank, but I really like a shorter gun.
.22L 20cm x 5.5cm
https://www.ebay.com/itm/Ultralight-0-22L-PCP-Paintball-HPA-4500psi-13ci-Carbon-Fiber-Cylinser-Cylinder/401922873387?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D2a78d579787449eda6d5965e278b7a07%26pid%3D100005%26rk%3D3%26rkt%3D12%26mehot%3Dpf%26sd%3D273862549460%26itm%3D401922873387%26pmt%3D1%26noa%3D0%26pg%3D2047675&_trksid=p2047675.c100005.m1851
or
.37L 26cm x 5.5cm
https://www.ebay.com/itm/Scuba-Diving-0-37L-4500psi-Carbon-Fiber-Cylinder-Paintball-PCP-Air-Tank-M18x1-5/174085640409
FX really need to provide more barrel options for the Lego gun. I may have to go with the Tact with 500mm barrel and 480cc cf tank, but I really like a shorter gun.
.22L 20cm x 5.5cm
https://www.ebay.com/itm/Ultralight-0-22L-PCP-Paintball-HPA-4500psi-13ci-Carbon-Fiber-Cylinser-Cylinder/401922873387?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D2a78d579787449eda6d5965e278b7a07%26pid%3D100005%26rk%3D3%26rkt%3D12%26mehot%3Dpf%26sd%3D273862549460%26itm%3D401922873387%26pmt%3D1%26noa%3D0%26pg%3D2047675&_trksid=p2047675.c100005.m1851
or
.37L 26cm x 5.5cm
https://www.ebay.com/itm/Scuba-Diving-0-37L-4500psi-Carbon-Fiber-Cylinder-Paintball-PCP-Air-Tank-M18x1-5/174085640409
Upvote 0
Dairyboy
Dairyboy, I agree with your research. Current production sales indicates .177/.22= 380mm and .25=480mm.
A 300mm barrel would technically be shorter than the 170cc air tube if i'm not correct.
Dairyboy, I agree with your research. Current production sales indicates .177/.22= 380mm and .25=480mm.
A 300mm barrel would technically be shorter than the 170cc air tube if i'm not correct.
Upvote 0
Circling back to the DL Plenum... What is the total plenum volume? not just the "plenum adapter" (17cc) volume.
Upvote 0
This bottles could be fitted with the oe shroud but both of them are longer that the shroud. Ir you change the shroud you could fit a 0,37l bottle (61mm width x 230mm long).
Upvote 0
Yes, the barrel of the compact it’s shorter than the bottle and more shorter with the plenum
Upvote 0
Macipod,
Hi, new member here. Just curious if you have finished the mods for your Dreamline and do you sell your shrouds to fit the Power Plenum?
Hi, new member here. Just curious if you have finished the mods for your Dreamline and do you sell your shrouds to fit the Power Plenum?
Upvote 0
Thanks a lot, I am planning to make a power planum for my p35, so I am looking for the dimensions of the wall thickness.
Upvote 0