Tuning FX Harmonic Barrel Tuner Compact (500mm) Issues

I have a buddy that owns a machine shop. I’m going to stop by tomorrow for him to have a look . I’m thinking we can turn the outside diameter of the weight down slightly to make it work. I don’t know much about machining so I don’t know if there is a reliable way to do that or not but I’ll find out tomorrow!

Measure the 300cc tank while your there.
 
I have a buddy that owns a machine shop. I’m going to stop by tomorrow for him to have a look . I’m thinking we can turn the outside diameter of the weight down slightly to make it work. I don’t know much about machining so I don’t know if there is a reliable way to do that or not but I’ll find out tomorrow!

Measure the 300cc tank while your there.

Okay I’ll have him measure it .
 
I have a buddy that owns a machine shop. I’m going to stop by tomorrow for him to have a look . I’m thinking we can turn the outside diameter of the weight down slightly to make it work. I don’t know much about machining so I don’t know if there is a reliable way to do that or not but I’ll find out tomorrow!

Measure the 300cc tank while your there.

The 300cc bottle on my M3 measures in at slightly under 62mm . 
 
  • Like
Reactions: WVHillBilly76
I have a buddy that owns a machine shop. I’m going to stop by tomorrow for him to have a look . I’m thinking we can turn the outside diameter of the weight down slightly to make it work. I don’t know much about machining so I don’t know if there is a reliable way to do that or not but I’ll find out tomorrow!

Measure the 300cc tank while your there.

The 300cc bottle on my M3 measures in at slightly under 62mm .

Thanks a lot for measuring.

So the 480cc (62mm) might clear moderator but probably wont clear the tuner. :(

700cc bottle looks to clear the tuner with 600mm and of course the 700mm barrel.

My heavy liner, power kit, carbon sleeve, and tuner are out for delivery today.

The 300bar bottles just now shipped.

I really wanted a compact power setup for mid weight slugs. Then i was going put together a .30 long range setup.

The tuner was going to allow me to set up the gun for power then find a node for accuracy with the tuner. Which is the true advantage of the tuner. Allowing one to not depend on fps alone to harmonically set your gun. Theoretically the tuner should open up a wider range of working velocities for a gun/projectile combo.

Guess Ill never know :(

Well until i get the gear for a .30 cal :)


 
I have a buddy that owns a machine shop. I’m going to stop by tomorrow for him to have a look . I’m thinking we can turn the outside diameter of the weight down slightly to make it work. I don’t know much about machining so I don’t know if there is a reliable way to do that or not but I’ll find out tomorrow!

Measure the 300cc tank while your there.

The 300cc bottle on my M3 measures in at slightly under 62mm .

Thanks a lot for measuring.

So the 480cc (62mm) might clear moderator but probably wont clear the tuner. :(

700cc bottle looks to clear the tuner with 600mm and of course the 700mm barrel.

My heavy liner, power kit, carbon sleeve, and tuner are out for delivery today.

The 300bar bottles just now shipped.

I really wanted a compact power setup for mid weight slugs. Then i was going put together a .30 long range setup.

The tuner was going to allow me to set up the gun for power then find a node for accuracy with the tuner. Which is the true advantage of the tuner. Allowing one to not depend on fps alone to harmonically set your gun. Theoretically the tuner should open up a wider range of working velocities for a gun/projectile combo.

Guess Ill never know :(

Well until i get the gear for a .30 cal :)


I am really interested to see if you have the same issue with the tuner or if mine is possibly just a 1 off. 
 
Well , after the machine shop it is like it should have been . 0.039 off the total diameter and now it fits . Little sand paper and some black spray paint ill be good as new . 
IMG-2049.1642185253.jpg