After a while of going back and forth between the impact and maverick I've decided to go w the impact .22. Which is the best/quietest/accurate moderator to go with?
FX Impact .22 M3 600mm Moderator?
- Thread starter smittiduss
- Start date
Thats a good choice, I use the Donny FL on my impact.. I heard good things from the whole Donny line of Moderators tbh. I have only ever used the FX FL's.
https://donnyfl.com/collections/ldc
https://donnyfl.com/collections/ldc
Upvote 0
I was looking at the donny line, just wasn't sure if one was better than another for gun/caliber I just ordered. Where at in SC are you located? I'm in Summerville.
Upvote 0
I went with the Sumo on my MK2 Impact in .22 700mm barrel. It has been perfect for my needs. When I just recently got my Crown also in .22 I went with the Tatsu. The rifle was already so long with a 600mm barrel that I wanted the shorter moderator. The Tatsu is the same diameter as the Sumo but about two inches shorter. It is also working great for me. Since your impact has a 600mm barrel it is a relatively short over all length. I’d go with the Sumo.
Upvote 0
I went with a Tatsu and the Huggett Dedicated Shroud. I have them on my 700mm and 500mm Impact.
Upvote 0
I have 4 Donny’s and only one FX Dreamline and the Dreamline came with its own?
The first Donny I ordered was the Emperor not knowing how big it was
All are very quiet.
The first Donny I ordered was the Emperor not knowing how big it was
All are very quiet.
Upvote 0
My .22 impact mk2 with a 700mm barrel did not got any quieter with the tatsu, compared to the stock FX hollow one. I choosed to stick with the stock FX hollow one, untill I got a huma mod, which made it quieter. The tatsu will make you gun a hair shorter, with no sound benefit over the stock FX hollow one. I would suggest you try another (longer) DonnyFL, or another moderator than tatsu. That just is my experiance.
Upvote 0