Updated to mark items sold - 12/16/2022
Very little use on any parts below. A couple liners never shot. Thought I was going to make two different systems so I would find which liners work best for pellets and which for slugs and then just swap out the whole barrel kit. Bought everything, tested a little, and it set on the shelf for a while. Then decided to go to 800 mm so now selling all of this.
The top kit is the M2 version that has the larger FX threads at suppressor. This includes original FX suppressor along with a couple different adapter rings that will fit into Donnie FL suppressors. And one .30 probe.
The bottom kit is the M3 version which has the 1/2x20 threads on the end. It also includes the Huma High Flow Dual Hole Transfer Port. And one .30 probe.
Twist rate is marked with permanent marker on all liners in pictures below.
All prices below are shipped CONUS and PP F&F or add 3% for fees. Pricing separately for mix and match or one price to take everything.
Top M2 kit with one liner now only shroud, FX moderator and Donny adapters- $50
Bottom M3 kit with Humma port and one liner -$325 $295
Add to either kit:
FX Carbon fiber liner sleeve - $20
Additional STX liner - $80
Total value of everything listed around $1,000. Priced as above $755. Buy everything listed as one $625
View attachment 20221113_173941.jpg
View attachment 20221113_174044.jpg
Very little use on any parts below. A couple liners never shot. Thought I was going to make two different systems so I would find which liners work best for pellets and which for slugs and then just swap out the whole barrel kit. Bought everything, tested a little, and it set on the shelf for a while. Then decided to go to 800 mm so now selling all of this.
The top kit is the M2 version that has the larger FX threads at suppressor. This includes original FX suppressor along with a couple different adapter rings that will fit into Donnie FL suppressors. And one .30 probe.
The bottom kit is the M3 version which has the 1/2x20 threads on the end. It also includes the Huma High Flow Dual Hole Transfer Port. And one .30 probe.
Twist rate is marked with permanent marker on all liners in pictures below.
All prices below are shipped CONUS and PP F&F or add 3% for fees. Pricing separately for mix and match or one price to take everything.
Bottom M3 kit with Humma port and one liner -
Add to either kit:
Additional STX liner - $80
View attachment 20221113_173941.jpg
View attachment 20221113_174044.jpg
Last edited: