FX FX Impact fill probe

[Charlie126]

Hello I have a FX Impact M3 and i would like to replace the fill probe that is on the gun I believe the Part number is 16303
I'm pretty sure i have a very small air leak I sprayed it with some air leak detector fluid and i have some very tiny bubbles comming out from the very end of it it's not really that big of an issue but just an annoyance. I was going to change the fill probe out but i can not find one
anywhere to buy does anybody know a company in the usa that sells them because i cant find one anywhere Thanks for your time Guys
any help would be appreciated.

 

[Airgunmann]

Take it out and replace the orings on the inside of it

 

[Airgunmann]

It should have a oring on the piece that acts as a check valve and a little spring holding it into place

 

[Gerry52]

Fill "probe" proper or do you mean foster?

 

[Theman406]

Hello I have a FX Impact M3 and i would like to replace the fill probe that is on the gun I believe the Part number is 16303
I'm pretty sure i have a very small air leak I sprayed it with some air leak detector fluid and i have some very tiny bubbles comming out from the very end of it it's not really that big of an issue but just an annoyance. I was going to change the fill probe out but i can not find one
anywhere to buy does anybody know a company in the usa that sells them because i cant find one anywhere Thanks for your time Guys
any help would be appreciated.

Utah airguns sells them

 

[Trucker3573]

Try putting one or two drops of silicone oil in it and fill it up. Many times that will rejuvenate it.

 

[Scotty1]

Fill "probe" proper or do you mean foster?

I thought maybe FX came out with the M3FP upgrade.

 

[Ca_Varminter]

The valve in the Foster nipple is a steel rod with a Urethane O-ring

2.9mm i.d. x 1.78mm c.s. dur.90

 

[bigHUN]

When I need one fitting, I order more. It is always good to think ahead and have some spare parts.