Fx Impact Fix & Mods for more FPS / FPE
- Thread starter AirSupply
- Start date
G
Guest
Guest
Just received an email from Johan Axelsson from FX Sweden.
He confirmed that the Slug Liners for the .30 caliber are available now! Both in 600 & 700mm length.
A bummer he did not gave the part numbers for it....
He confirmed that the Slug Liners for the .30 caliber are available now! Both in 600 & 700mm length.
A bummer he did not gave the part numbers for it....
Upvote 0
I called PBA this morning to inquire about the .30 slug liners. I think he said they would have them soon but I'm not sure because I have trouble understanding the guy on the phone. I think he's using speaker phone so it sounds muffled.
Upvote 0
Dorians is in the way there ... but as we know..soon is a relative word in FX 
I got better news...real soon! according to FX USA! jajaja
I got better news...real soon! according to FX USA! jajaja
Upvote 0
Today, I found something in the mail box...
Thank you very much @edosan... it is always fun to come back from some holidays and find new toys waiting for you
Does anyone on this thread know where I could purchase just the hammer weight I honestly could probably make one in my friends machine shop but for the nominal price I'm sure they cost id just like to buy one. Thanx ahead for any info guys.
Upvote 0
G
Guest
Guest
OK! The part number for a FX STX Slug Liner A, in caliber.30/700mm is FX20234
Cheers
Cheers
Upvote 0
Yes,I you can but it is best to ensure the hole remains centered. I chucked my valve seat in a hand drill and rotated it while I filed out the hole to 6mm and polished it.
Upvote 0
Today, I found something in the mail box...
Thank you very much @edosan... it is always fun to come back from some holidays and find new toys waiting for you
@edosan how to get these parts?
Upvote 0
Today, I found something in the mail box...
Thank you very much @edosan... it is always fun to come back from some holidays and find new toys waiting for you
@edosan how to get these parts?
..............
Upvote 0
thnx heavy-impact , I did not know that ! Just bought 2 sets from edosan ! Thanks for the link. And thanks edosan for making this availabe to us !
Too bad I did not know this sooner, I had just opened up the Impact and put it back together. Now I can start all over again ;-)
Too bad I did not know this sooner, I had just opened up the Impact and put it back together. Now I can start all over again ;-)
Upvote 0
Stage 2 done!
Amazing!
You got it by Heavy (and thanks), but please avoid to publish that over here, probably rules on the forum are been break for that (not a selling place), send me PM in the future. I do not want to be banned or get my post erased. I always try to follow the rules
Upvote 0
Two questions - (1) For tuning an Impact with expanded plenum volume, does VDT generally need to increase? I put in an additional 7 gram hammer weight in place of the spacer already. My MKII came with the integrated VS, and the TP in the housing was already (slightly oval) 7.3mm x 7.19mm.
(2) minimum reg pressure - should I avoid going on 100 bar?
(2) minimum reg pressure - should I avoid going on 100 bar?
Upvote 0
Today, I found something in the mail box...
Thank you very much @edosan... it is always fun to come back from some holidays and find new toys waiting for you
@edosan how to get these parts?
He sells them on ebay for $120 per set https://www.ebay.com/itm/Fx-Impact-Power-Kit/223613092376?hash=item3410610218:g:TAEAAOSwKe1dP081
Thanks
Upvote 0