FX Impact-Hammer spring is stuck when cocking the gun

[vimalkarur]

When cocking the gun some time hammer spring is stuck and then it is released when the cocking lever is halfway. This dosenot happen all the time, only once in a while. But when this happens the next shoot will be a flyer. Is there a way to remove the patrs C8,9,10,11. I do not see anyone remove these parts in any disassembly video.

https://youtu.be/bM-Jyxda-LM

Watch the hammer spring tilt and straighten at 0.05

 

[ackuric]

Hmm, this is why I love to run spring guides with free flight designed into the system. Seems like something is not lining up correctly though, hope someone can help!

 

[edosan]

You can take the spring, hammer and guide out, it is explained in the Master Class videos. Check That...C9 just needs to be unscrewed to take it out.

https://www.youtube.com/watch?v=TjLeO7O8DA0

You are right, there is no mention there but if I recall correct when you remove the hammer rest, you can take out the spring, hammer and guide, check this one: https://www.youtube.com/watch?v=HDCIyO9mxmg

 

[toku58]

Looks like the spring might be bent/distorted? So when you try and cock it; it gets hung up because it's not compressing in a linear motion.

 

[edosan]

This one can help too

https://www.youtube.com/watch?time_continue=31&v=tzPTiQUenv4

 

[edosan]

This one is even better

https://www.youtube.com/watch?time_continue=96&v=y1eaUg4MPMQ

 

[heavy-impact]

The newer models have a plastic spring guide. If you install a high power kit from FX, it has a combination hammer weight spring guide.

 

[HavocX]

High power kit? Never heard of this option . 

 

[heavy-impact]

High power kit? Never heard of this option .

Yep... Just call FX USA and order Earnest Rowe's high power kit. It's that simple. 1-866-639-0772

 

[vimalkarur]

Thank you all for the help.

I wil buy the high power kit, and try.