If zeroed at 100yds what would you think the holdover should be? I tried shooting at 200yds with no luck I could hear the pellet hitting the plywood target hanger but no luck hitting target. I'm shooting a M3 in 25cal with JSB exact king 25.39gr.
FX FX impact holdover at 200yds?
- Thread starter rodm1
- Start date
Its usually easier to pick a spot on the berm and shoot at that to find your POI. Its a lot easier to see dirt kick up than it is to see a hole get punched in a back board. Once you have a rough zero from shooting dirt you can fine tune it on paper much easier.
Upvote 0
I like that trick but it's to wet for that just have to wait it out I guess thanks.
Last edited:
Upvote 0
Strelok is your friend. What's your FPS with the Kings? Can get you close. Say 900fps sighted in at 100yds with 3" scope height would be 36.3 MOA or 10.6MIL drop at 200yds
Upvote 0
Using a bone stock M3 no idea on FPS but 2-3/4" scope height. I will look at doing a 36" hold over and see next trip.
Upvote 0
Rod,
My M3 .25 Sniper prefers the JSB 33.95s, never had much luck with the 25.39s. My impression is that JSB really shines with the .25 in 33.95, .30 in 44.75 and .22 in the 18.1. Heading out to 200, might be worth considering. WM
My M3 .25 Sniper prefers the JSB 33.95s, never had much luck with the 25.39s. My impression is that JSB really shines with the .25 in 33.95, .30 in 44.75 and .22 in the 18.1. Heading out to 200, might be worth considering. WM
Upvote 0
Here's some basic data from Strelok using my .25 Dreamline and raising the scope height a bit. Without hard data it probably isn't right but it may be pretty close:
Upvote 0
I don’t shoot much long range but 200 yards with a pellet especially as light as that seems like a Hail Mary into the end zone with 2 seconds left in the game.
Upvote 0
They do suprisingly well. This isn't a great video but here's my attempt at 220yds in HEAVY wind just throwing pellets at broken clays
Upvote 0