[No trade offers on this listing please...]
Hello AGN,
I'm looking to sell an FX Impact M3 Standard 0.22 600mm in black w/ FX high capacity Side-Shot magazine, FX moderator, Magpul MOE-K2+ grip, stainless steel bolts installed, FX extended foster fitting, and factory FX hard case. This is the latest iteration of the M3 with the Power Block and front barrel clamp; the barrel has dual transfer ports (P for pellets & S for slugs) and has the latest STX Superior pellet liner inside. This awesome rifle is currently set up to shoot 18.13g JSB's at 915-920fps with great consistency and accuracy. First reg is set to 150 bar, second reg at 100bar, power wheel is at 8, Quick Tune adjuster is at 3, and valve adjust is at about 3.5 bars - at this setting, the rifle is very quiet with the included factory FX moderator. It also comes with a complete set of stainless steel bolts already installed (with anti-seize compound applied); these bolts not only look better - they'll wear better over time as they will not rust. All of the original black screws will be included as well if you want to reinstall those instead.
This rifle is in excellent condition, holds air perfectly and shoots extremely well. This was my personal rifle for the last year or so and it has served me very well whenever I needed it. It wasn't shot much but was always reliable and accurate whenever a ground squirrel popped up in the backyard. The left and right side plates by the butt stock and shroud have been wrapped in an automotive grade carbon fiber wrap (the rear plates were previously cerakoted in a distressed red/black color). The original grip was upgraded to the Magpul beavertail AR grip in stealth gray. The only thing to point out on this rifle is that the tiny little factory FX grub screw that holds the pellet probe in the carrier is stripped. FX loctites this tiny little grub screw at the factory so it's very difficult to remove without stripping the screw so if you plan on replacing the pellet probe or doing a barrel caliber change, you'll need to figure out how to get this stripped screw out before doing so. Other than that, this rifle is rock solid and ready to go! The only reason I'm selling this rifle is because my M4 finally arrived.
Price is: $1500 + 1/2 shipping within the continental US (scope and mounts not included in the selling price...)
Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I have plenty of feedback both here as well as dating back to the old Yellow Forum so please feel free to do your due diligence and know that you're dealing with a reputable trader.
Hello AGN,
I'm looking to sell an FX Impact M3 Standard 0.22 600mm in black w/ FX high capacity Side-Shot magazine, FX moderator, Magpul MOE-K2+ grip, stainless steel bolts installed, FX extended foster fitting, and factory FX hard case. This is the latest iteration of the M3 with the Power Block and front barrel clamp; the barrel has dual transfer ports (P for pellets & S for slugs) and has the latest STX Superior pellet liner inside. This awesome rifle is currently set up to shoot 18.13g JSB's at 915-920fps with great consistency and accuracy. First reg is set to 150 bar, second reg at 100bar, power wheel is at 8, Quick Tune adjuster is at 3, and valve adjust is at about 3.5 bars - at this setting, the rifle is very quiet with the included factory FX moderator. It also comes with a complete set of stainless steel bolts already installed (with anti-seize compound applied); these bolts not only look better - they'll wear better over time as they will not rust. All of the original black screws will be included as well if you want to reinstall those instead.
This rifle is in excellent condition, holds air perfectly and shoots extremely well. This was my personal rifle for the last year or so and it has served me very well whenever I needed it. It wasn't shot much but was always reliable and accurate whenever a ground squirrel popped up in the backyard. The left and right side plates by the butt stock and shroud have been wrapped in an automotive grade carbon fiber wrap (the rear plates were previously cerakoted in a distressed red/black color). The original grip was upgraded to the Magpul beavertail AR grip in stealth gray. The only thing to point out on this rifle is that the tiny little factory FX grub screw that holds the pellet probe in the carrier is stripped. FX loctites this tiny little grub screw at the factory so it's very difficult to remove without stripping the screw so if you plan on replacing the pellet probe or doing a barrel caliber change, you'll need to figure out how to get this stripped screw out before doing so. Other than that, this rifle is rock solid and ready to go! The only reason I'm selling this rifle is because my M4 finally arrived.
Price is: $1500 + 1/2 shipping within the continental US (scope and mounts not included in the selling price...)
Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I have plenty of feedback both here as well as dating back to the old Yellow Forum so please feel free to do your due diligence and know that you're dealing with a reputable trader.