Hi lads just got an FX impact MK 3 .177 wanted some help with the tuning wondering if anyone could give me there recommended general tuning settings for 10.34g pellet and 10.03 slug cheers
Last edited:
Hi mate ok so how do you know if it’s going too fast or too slow ? CheersThe only little nugget I can offer is high pressure and short valve timing.
I thought I had a bad liner and wasn't able to get much accuracy at all until I had the reg up to about 150 and the hammer somewhere in the middle range going about 50 fps too fast, then I turned the valve limiter down to reach desired speed. Once that was sorted it was outstanding!
Sadly, I sold that barrel setup to go down the .22 slug rabbit hole, and here I sit at the bottom of that hole! it works great but it is temperamental and expensive. A .177 Impact is a great combination.
YMMV.
Can you tell us a bit more about you current setup?Hi lads just got an FX impact MK 3 .177 wanted some help with the tuning wondering if anyone could give me there recommended general tuning settings for 10.34g pellet and 10.03 slug cheers
Do you have a chronograph? That is the only way to know the speed of the pellet.Hi mate ok so how do you know if it’s going too fast or too slow ? Cheers