Tuning FX Impact triggers

[Airgunmann]

I was doing some thinking as I was looking at the mk2 and m3 trigger set ups and found that if you just pull out the plunger screw in the trigger it effectively becomes a single stage light trigger one would have to be careful with it but with a little adjustment you can shorten the length of pull and set the stop after the trigger breaks the safety also still works as it should Im not endorsing this and do this at your own risk I take no responsibility either 

MOD EDIT: MOVED TO PCP TUNING & REPAIR SECTION

 

[qball]

Never mind, read the thread wrong. That's exactly what I did to get mine to be a single stage trigger, don't care for dual stage trigger for my shooting style. 

 

[Airgunmann]

I did this to you take out the plunger screw it gets way lighter 

 

[bigHUN]

I polished all the moving=mating surfaces on my MK2 trigger and now it is soo butter smooth I can feel the spring in the plunger screw. Next plan is to open the plunger and polish the hole for that spring.

 

[Airgunmann]

Yeah I see that it is possible to pop the ball out and adjust spring length to lighten it up some there is a lot of spring pushed into the small area then reinstall spring and tap the ball back in and tap or two on hard surface to help crimp the ball back in so your polishing can be done 

 

[mubhaur]

https://youtu.be/YiJYY93lmRY

Here I have made the plunger spring pressure adjustable as per needs of the user.

It might be of some interest for you.

Bhaur