Finally fx impact is ready with hammer forged 600mm .25 barrel and custom made LDC.
Regards,
Umair Bhaur
Regards,
Umair Bhaur
Fx impact with hammer forged barrel is ready (pics)
- Thread starter mubhaur
- Start date
Nice bit of work there. Now the $1000 question, how does it shoot?
Joe
It's one MOA at 100 yards.
Upvote 0
Tell your machinist that if he can't find his needle nose pliers, they fell down in the bed between the chuck and steady rest 
Upvote 0
Tell your machinist that if he can't find his needle nose pliers, they fell down in the bed between the chuck and steady rest
Thank you sir
Upvote 0
Very nice!!!! You are ready for at least 10,000 rounds of full metal jacket slugs or one million pellets.....or two! 
Upvote 0
Upvote 0
The fx liner are so accurate. Idk why anyone would spend the money or time with aftermarket barrel on a really already accurate gun. I have a hammer forge on my Mrod made by Jim Gaska aka Marmot militia. It was accurate but no where near as accurate as a fx X liner.
Upvote 0
Normally the barrels which I use are as accurate as fx stx barrels. Due to being real barrels there is no chance of shift of POI.
I hope you have seen what efforts Ernest puts in making the stx barrel stiff.
Impact M3 is also going to offer carbon fiber sleeve to stiffen the stx barrel.
But a real barrel is a real barrel.
Regards,
Upvote 0
It looks pretty! I'm not sure why though...The FX barrel system is as accurate as God's written words in my experience.
Upvote 0
Mine too, but then again as you well know, I was cf lining my barrels long before FX. I sent Ernest specs a couple of years ago, but as usual. No reply.
Knife
Knife
Upvote 0
Mine too, but then again as you well know, I was cf lining my barrels long before FX. I sent Ernest specs a couple of years ago, but as usual. No reply.
Knife
I often receive replies from Ernest.
I am thankful to Ernest.
Regards,
Umair Bhaur
Upvote 0
A REAL SOLID barrel would probably be a good thing on any gun. Especially that one. I'll take a real barrel any day. Nice work!
Upvote 0
