FX Impact with Huggett Moderator
- Thread starter Parrots
- Start date
Sweet, how's it sound? Does it goes on the end of the telescopic shroud by replacing the end cap? How much did it cost you?
Upvote 0
Wow very nice! Which barrel is it connected to in the picture (22 cal?). How much length does it add to the barrel?
Upvote 0
4.7" and it's a .25 barrel. I know these work with the .30 and .25 but the .22 has a tube connected to the end cap on the original shroud that comes out with it and although it can be fitted the original shroud tube retracts back more then it does with the original end cap on.
Upvote 0
How does the Huggett attach to your Impact? Does the Huggett comes with a new end cap for the Impact shroud to fit the moderator?
Upvote 0
Fits with an adapter i had made to screw on to shroud and have 1/2" UNF attachment on other end.
I also use a Verminator adapter that screws on to the shroud and this allowed Huggets with the Wildcat thread to fit.
I also use a Verminator adapter that screws on to the shroud and this allowed Huggets with the Wildcat thread to fit.
Upvote 0
Parrots, If I understand you correctly, you remove the factory shroud end cap from the Impact and replace it with the end cap from a FX Verminator which then allow the Hugget that is design for the Wildcat thread to fit the Impact.
Upvote 0
It would be great that I can buy from anywhere sell the set like this. Man, I have been waiting from November, but ask AoA about the hugget...still not available...you hugget look awesome!!!
Upvote 0
IMHO it makes the gun too long. I had the same with my Talon SS with moderator, started looking like a broomstick and very unwieldy swinging out a door for a quick backyard shot.
Upvote 0
With the Huggett Belita it is shorter then then with the shroud extended and much more quiet.
You can also take the shroud off on the .22 and .30 and screw the Huggett directly on the barrel which keeps the rifle about the same length as with the shroud retracted and still quieter.
You can also take the shroud off on the .22 and .30 and screw the Huggett directly on the barrel which keeps the rifle about the same length as with the shroud retracted and still quieter.
Upvote 0
I got it from a local dealer who ordered them in for me.
I will take a pic of it later so you can see exactly what it is.
I will take a pic of it later so you can see exactly what it is.
Upvote 0
Been busy with work and travel lately. Here are the pictures promised.
![63yjp4.jpg](http://[url="http://i68.tinypic.com/63yjp4.jpg"][img]http://i68.tinypic.com/63yjp4.jpg)
[/url][/IMG]
![w2ohz4.jpg](http://[url="http://i65.tinypic.com/w2ohz4.jpg"][img]http://i65.tinypic.com/w2ohz4.jpg)
[/url][/IMG]
![hv4eg5.jpg](http://[url="http://i68.tinypic.com/hv4eg5.jpg"][img]http://i68.tinypic.com/hv4eg5.jpg)
[/url][/IMG]
![2zrf05j.jpg](http://[url="http://i64.tinypic.com/2zrf05j.jpg"][img]http://i64.tinypic.com/2zrf05j.jpg)
[/url][/IMG]
Upvote 0
I received a bunch of these Verminator adapters for friends today. The part number on the bag is 18010 for those that messaged me for it 
Upvote 0
Hugget Belita. .25 and .30. Mounting directly on the extended shroud. Just loosening the endcap. The .22 has a fairly low sound level, so I have not checked if you could get one for that caliber. Very satisfied with the .25' sound level now. Haven't uset the .30 yet, but assume the hugget will do its job there also. Got them from airgun heaven - Netherland.
Upvote 0
Where do I purchase the endcap with external male threads?"Parrots"Been busy with work and travel lately. Here are the pictures promised.
Upvote 0
Where did you get the thread adapter so u can screw this directly to the shroud....not the verminator adapter.....is this a wildcat thread?
Upvote 0