I can send you a thicker delrine seal for the reg side so the body don't bottom out if you like ?
anybody else???
anybody else???
Upvote 0
FX Impact with upgraded gauges " WIKA" photos
- Thread starter sniperlabyo
- Start date
Ernest, My WiKi gauges from this batch should be here later today. I'm sure I will need the delrine seal to achieve better alignment. Can I purchase two from you? I Will PM you.
Upvote 0
Hello,
May I know how to get Wika Gauges.
Mr. Ernest I need your help, May I know how to Get the metal valve stem for .025 R3m long.
I will pm you .
May I know how to get Wika Gauges.
Mr. Ernest I need your help, May I know how to Get the metal valve stem for .025 R3m long.
I will pm you .
Upvote 0
Are these gauges currently available stateside? If they are who is selling them and whats the going rate? If there is a problem posting the info please PM me. Thanks.
Upvote 0
Bump this post again to find where I can buy this Wika gauge. It's been used on Edguns and Mutant but I still can't find anyone carry it in the US. Please help if you guys has some info to share.
Thanks
Thanks
Upvote 0
Have you tried the importer? One in CA and Georgia according to Ziabeam's earlier post on this same thread.
"California importer indicated there may a minimum order, but that regional distributors would likely sell individual gauges. In my case the closest one is in Georgia (eastern time zone)… closed at the moment. The California rep said they are budget friendly parts, and more than likely on the shelf in Georgia. If there turns out to be a minimum-order-limit perhaps we could organize a group buy. Will cross that bridge if/when it appears.
The pdf file indicates the “Hi” pressure version reads 0-400 bar… ignore that. It reads 0-315 bar.Will let you know how the ordering process goes.
The Georgia based WIKA distributor’s number is 888 945-2872Hope this helps."
Hat tip- Ziabeam
You might well try (need to do) the same group buy if that's affordable but you should have no trouble unloading those even for a profit if you choose given all the Impacts out there.
Just a thought.
"California importer indicated there may a minimum order, but that regional distributors would likely sell individual gauges. In my case the closest one is in Georgia (eastern time zone)… closed at the moment. The California rep said they are budget friendly parts, and more than likely on the shelf in Georgia. If there turns out to be a minimum-order-limit perhaps we could organize a group buy. Will cross that bridge if/when it appears.
- Specify brass or chrome
- Specify “Hi” pressure version
- Specify G1/8B threads
- Part number 111.12.027 (references in other posts left out the “zero”)
The pdf file indicates the “Hi” pressure version reads 0-400 bar… ignore that. It reads 0-315 bar.Will let you know how the ordering process goes.
The Georgia based WIKA distributor’s number is 888 945-2872Hope this helps."
Hat tip- Ziabeam
You might well try (need to do) the same group buy if that's affordable but you should have no trouble unloading those even for a profit if you choose given all the Impacts out there.
Just a thought.
Upvote 0
Evening Ernest, I'm inquiring to see if you are taking on air.gun tunes"ie" a 25 cal impact. A pin on the cocking lever linkage broke and I've no doubt that several seals could use work. There are too many rounds thru it to count. Thanks, Sal
Upvote 0
Is replacing these gauges as simple as unscrewing them and installing new ones in their place?
Upvote 0
I believe so, yes. You might need a thicker seal on one of them - it depends on what you have in there now.
I contacted Wika in Lawrenceville, GA and they dont carry that item in stock. The rep suggested I purchase from one of their distributors, Motion Industries. We can order direct from Wika but its a $100 credit card min.
I contacted Wika in Lawrenceville, GA and they dont carry that item in stock. The rep suggested I purchase from one of their distributors, Motion Industries. We can order direct from Wika but its a $100 credit card min.
Upvote 0
Does anyone else want a pair of gauges - if there's enough interest Ill order a batch direct from Wika - there is a lead time on these though (probably 5-6 weeks)
Upvote 0
Anyone else interested? I suspect that 4 is enough to meet the min order qty. I'll supply these at cost + shipping via ground UPS + packaging.
Upvote 0
i dont like the large gauges, good chance it will get knocked. how often you use it anyway. i would just set it up and blank it off.
Upvote 0
G
Guest
Guest
Here is where to buy the wonderful Wika manometer...https://www.edgunwest.com/store/p74/Wika_gauge_.html As a way to test the regulator pressure in my Wildcat without using a reg tester I just do what Ernest says to do in this video, but I have been using a FX manometer from my Streamline to do so. Just ordered one of these to use instead...I think it will be much more accurate than the FX. I am actually thinking about trying to see if it will fit on the end of my air tube also. I ordered one not more than an hour ago and within 15 minutes of ordering I received an email showing it had already shipped via USPS! WOW! There are a couple other places that could take a lesson on how to do business from the guy at Edgun West!
All the best, Chuck
All the best, Chuck
Upvote 0
If you need one maybe two at $40 a pop your looking at spending $50/100'ish (that is with shipping and possible taxes included) but if you looking to get 3 or more better off going with WIKA direct and get them $25 per gauge though a ($100 min) per order still a better deal if this a must have item for your air rifles.
Upvote 0