FX Impact x or FX Crown?

I can confirm from earnest(phone call from 1 year ago)that the impacts trigger is worst than the royales and wildcat. It has no linkages yes but it still has a 2nd stage weight limit. at a certain point(above 1 lb) you lose the first stage to get a lighter trigger. Turns the impact into a 1 stage trigger. This is what i have found during the 1.25 gen impacts with the updated trigger mechanism. Not sure if it has changed with my impact X but it is no where as good/light as my wildcats(i have not lightened the second stage on my impact x yet). Id imagine the crown has a similar trigger to the royale thus drawing from this information can imply that you will have a better trigger with the crown vs impact. Better in my opinion is lighter(but not too light).
 
I can confirm from earnest(phone call from 1 year ago)that the impacts trigger is worst than the royales and wildcat. It has no linkages yes but it still has a 2nd stage weight limit. at a certain point(above 1 lb) you lose the first stage to get a lighter trigger. Turns the impact into a 1 stage trigger. This is what i have found during the 1.25 gen impacts with the updated trigger mechanism. Not sure if it has changed with my impact X but it is no where as good/light as my wildcats(i have not lightened the second stage on my impact x yet). Id imagine the crown has a similar trigger to the royale thus drawing from this information can imply that you will have a better trigger with the crown vs impact. Better in my opinion is lighter(but not too light).

I noticed the Wildcats are advertised with a 15 ounce trigger and the Impact comes set at 1# 11 ounce, The Royal at 12 ounces, and the Crown comes set at 1# 10 ounce
 
I believe the impact has more o rings and gas seal joints than most any other airgun. Every joint is a potential area of failure and maintenance. On the plus side the trigger doesn't need a linkage so it should be much better than any other Bullpup. Also the hammer noise is not right next to your ear.

I believe the impact has more o rings and gas seal joints than most any other airgun. Every joint is a potential area of failure and maintenance. On the plus side the trigger doesn't need a linkage so it should be much better than any other Bullpup. Also the hammer noise is not right next to your ear.


Gas seal joint ??
 
Yes is know, but then i have to change the brass Port or am i wrong? When it has to be changed im afraid of damage anything.

I think the brass part is the same between crown and impact but i could be mistaken.

I think I saw a video of ernest rowe, changing the brass part of the barrel to fit on a crown, but I’m not sure.