PCP Rifle FX King .25 600mm with Extra Kit (***REDUCED***)

[NAProf]

FX King 600mm .25 with Hunter Brown GRS stock. This is a beautiful rifle in a wonderful stock, but I am not shooting it enough to do it justice. Thought I would get into longer range shooting but that hasn’t worked out as there is nowhere close for me to shoot. I am going to go back to all .177 equipment (with a.22 barrel and probe for occasional hunting) to keep wife and neighbors happy. So, all the great potential of this rifle would not get used by me.

This rifle was bought with a 500mm .22 barrel with the 110mm long plenum. I got the parts and converted it to a 600mm .25 barrel with a 220mm long plenum. I am selling it in the setup shown here - 600mm .25 cal (Superior STX liner - 1:24 TR). I will also include:

• Two .25 FX magazines (new style with bearing and 15 shot)
• One .22 FX magazine
• CARM single shot loader (both .25 and .22)
• 600mm Superior Heavy STX Liner (1:18 TR) with CF sleeve (not glued)
• 500mm Superior STX Liner in .22 (1:24 TR) with CF sleeve (not glued
• 110mm plenum, pellet probe, and parts needed to go back to a .22 cal.
• Saber Tactical Picatinny Bottle Clamp.
• Full set of O-rings in separate packages by part number.
• Custom-fit FX Hard Case
• **** Now including Huma Avalanche 40-4 .25 Moderator ****

I currently have the rifle shooting the JSB 25.39 pellets at 907 fps with an SD of 2.3 and an ES of 10. This is with a regulator pressure of 75 bar and QTS at @ 1.2. Shooting around 5 mags without dropping off reg. I have also shot the FX 34.9 pellets at 870 with an SD of 3.1 and ES of 9. That was at a reg pressure of 90 bar and QTS of @ 1.75. With this setup I usually get more than 4 mags shot.

New Price of $1650 !!! I am asking $1800 TYD. PayPal FF or PayPal Invoice if you pay the extra. The scope, rings, bipod, and monopod/bracket are not included.