Good evening one and all. I have a problem that is sending me nuts I have a Maverick that will not zero I can get great groups but only by compensating it would appear that it’s 20 and change MOA out and I can not the the scope down any further I’ve used cheap a dammed expensive mounts adjustable and none adjustable different scopes you name it and I have most probably done it. If any of you have any ideas what is going on I would be extremely grateful.
Tuning FX Maverick
- Thread starter Daystate28
- Start date
I heard a few came out with the wrong rail on it. Please post pictures of your setup. I am using eagle vision mounts on mine, I also used leupold high rings and didn’t have issues. I would invest in a set of adjustable rings like the eagle vision.
Upvote 0
I too am using adjustable eaglevision scope rings and haven't had any issues. I know that doesn't help you any but if you can't dial down any further I would try some different rings. 
You can see my back ring is sitting up higher than the front and it also gives me the ability to dial up greatly. I like to zero at around 33 to 35 yards, for my setup, so all yardages have me dial up and not down.
You can see my back ring is sitting up higher than the front and it also gives me the ability to dial up greatly. I like to zero at around 33 to 35 yards, for my setup, so all yardages have me dial up and not down.
Upvote 0
First batch of Mavericks came with a zero MOA scope rail. I have one. FX about 3 months later sent me a 20 MOA scope rail free.
You can level the gun then check the scope rail for forward tilt. If none you have a zero rail
You can level the gun then check the scope rail for forward tilt. If none you have a zero rail
Upvote 0
I have a Maverick too. Put some adjustable mounts on and compensate with the mounts. Put your turrets back on zero or you can screw down farther to give you more adjustment if you are dialing. Like Cranky1 said some Maverick didn’t come with the 20 moa rail. Fx can send one to you just contact them.
Upvote 0