Fx Panthera safety not working
- Thread starter 50yards
- Start date
Did you mess with the trigger adjustment? If it is like most triggers, that's the way the safety goes away. Too much of one adjustment will cause safety not to work.
Allen
Allen
Upvote 0
Than you for reply no it is a brand new gun.First serious Airgun haven’t touched anything yet.
Upvote 0
Was it working when you first got the gun?
I can understand your precaution in not wanting to tear into it straight off. The adjustment is simple and videos are easy to find on tuning an FX trigger. I have not watched one on the Panthera but other models do not lack for information on the process.
I can understand your precaution in not wanting to tear into it straight off. The adjustment is simple and videos are easy to find on tuning an FX trigger. I have not watched one on the Panthera but other models do not lack for information on the process.
Upvote 0
I’ve seen some of those videos.Ive only shot about 20 rounds off a tripod dont even have a scope on it yet.Was just pulling trigger from around 25 yards just seeing if it was grouping thats when I found it.Had it less than a week.I couldn’t find a video on adjusting the safety screw on the Panthera might be as simple as a trigger adjustment too.Gonna talk to dealer tomorrow.Have another problem also.This is not going well so far lol.Thank you
Upvote 0
Send it back to FX, make sure you post your results here for everyone to see. I had a long post on AGN about my M3 that went back 4 times. Just keep sending it back, the head tech at FX USA is Oliver ask him specifically to fix it. These guns cost way to much to be junk.
Upvote 0
Good news called dealer.There is an allen head 2mm under trigger guard.There is a hole in back bottom of trigger guard for access.Turn clockwise 1/4 turn (check) repeat till it works.Worked for me will keep an eye on this to make sure.Thanks for all the replies
Upvote 0
Well after messing with its on the way back to dealer.I could get safety to work then testing it every 4th or 5th time testing it would fire on safety.Adjust safety up to point of gun would not fire and back off safety adjustment same result every 4th or 5th test it would fire on safety.Hopefully this is not a trend will keep updated
Upvote 0