A few pictures of the FX Royale 400 that I picked up from AoA.
Happy Shooting
Happy Shooting
FX Royale 400 - AoA
- Thread starter Tuna64
- Start date
If you've never had one you're going to be a happy camper! I've been in love with my 500 & Boss since day one. Never let me down! HAPPY SHOOTING indeed.
Congrats!
Congrats!
Upvote 0
Shot my 400 and two 500's yesterday for the first time in three months and they are still dead nuts on. You'll love yours.
Upvote 0
Beautiful stock and super clean !
You now have eliminated one of the major excuses for missed shots haha can't blame the pcp has to be the driver
.
Enjoy That reliable easy to maintain shooter .
You now have eliminated one of the major excuses for missed shots haha can't blame the pcp has to be the driver
. Enjoy That reliable easy to maintain shooter .
Upvote 0
Wow! Beautiful. I had one new model and one 1st gen, great guns I foolishly let go. They are super rifles and you're lucky, as if I'd seen it on AOA, it'd be living at my house.
I do like the versatility of the Crown, so it is my favorite FX. I like being able to tune on the fly.
I do like the versatility of the Crown, so it is my favorite FX. I like being able to tune on the fly.
Upvote 0
I got that exact gun at a gun show a couple months ago. Yours is the first one ive seen like mine that doesnt have FX in the stock. Mine was un regulated so im installing a huma. I had to dis assemble it to find no regulator . Some people say regulated guns have a vent hole under the pressure guage. I looked and found the hole but it was not drilled all the way thru. Un regulated guns also have smaller valves so i changed that out also. I plan to take the advice of others out there who give tune advice and set the reg to get 934 FPS with full hammer spring then cut back to 890 by backing the hammer off. Since i got to take the thing apart to do a reg change i may take a while. As of today im getting about 900FPS at 125 BAR and full hammer. About 890 hammer backed off but i think i want to get those numbers a little farther apart like ive been reading. Oh yeaha forgot to mention pellets are 15.9 grain. When i shoot 18.13 s my speed is between 840 and 850. Dont know how old mine is but serial # is five digets starting at 29.
Upvote 0
@ Rat Reapet from the chronograph report from AoA, my FX Royale 400 was shooting JSB 18.13 at an average of 890 ft/sec. I’m guessing it will shoot the JSB 15.89 around 920 ft/sec. It had what looks to be a FX factory regulator with 2 small metal washers on the regulator as I was told that how FX got the proper space for the regulator according to AoA. I too was surprised not to see the FX logo on the stock but it had it on below the handle grip. Here’s a few pictures.
Happy Shooting
Upvote 0
Never seen a non ambidextrous stock before on one of these either (no cheek weld on left side)! Custom job originally?
NOTE: I meant no weld on RIGHT side for left handed shooter!
NOTE: I meant no weld on RIGHT side for left handed shooter!
Last edited:
Upvote 0
I have gotten some killer deals on older models/used guns through AoA. I’ve got some older Brococks (pre Daystate) , an HW100FSB, and Walthers for gonga prices! It’s always worth it to peruse their used section. Many times those “used” guns are actually new floor models.
Upvote 0
I have gotten some killer deals on older models/used guns through AoA. I’ve got some older Brococks (pre Daystate) , an HW100FSB, and Walthers for gonga prices! It’s always worth it to peruse their used section. Many times those “used” guns are actually new
Here's mine I got from AOA in 2022. The last wood stocked one they had.
Upvote 0