FX FX Wildcat BT Leak

Had a small leak in a new Wildcat BT I purchased and finally got time to look more into it. The bottle had completely emptied itself due to the leak so I went to fill it back up and as soon as pressure got back on the bottle, I could hear air coming out of the hole above where the bottle screws in. Any ideas on what could be the cause? Rear reg pressure is holding steady. This is my first air gun so any and all help welcome. Thanks in advance.

IMG_8454.jpg
 
Last edited:
It’s simply an oring thing. Easy fix is completely subjective. On the surface yes just an oring change. I personally find them a royal PIA. There are videos on YouTube and like 5 or 6 orings to change. There is an oring in the bottom of the reg itself that is super hard to get back in to the right spot. There is one that is hidden pretty well down inside the gun body itself. In the threaded hole the reg unscrews out of. Super tricky as well. If you do it yourself absolutely get some non marring picks. Nylon or brass ones as to not scratch the oring sealing surface or you will have a permanent leak. The gun is also under warranty and can be sent to utah Airguns or cape fear Airguns if you are in the east coast. Unfortunately the same thing happened to my BT after a couple months. After struggling with the reg I sent it to cape fear.
 
Last edited: