WHAT KINDA REG PRESURE YOU GUY RUNNING COMPACT 22 MK3 WILDCAT SEEMS LIKE 110 BAR AND HAMMER ADJUSTER MOST OF THE WAY IN ON MINE POWER 6 890 WITH 16 GR
Tuning FX WILDCAT MK3
- Thread starter douger
- Start date
- .22
- Reg 100 bar from factory
- 230 Bar fill
- 4 mags (72) shots
- Hades:
- 3- 830 FPS
- 4- 887 FPS
- 5- 907 FPS
- 6- 930 FPS
- 7- 933 FPS
- JSB 18:
- 1- 665 FPS
- 2- 700 FPS
- 3- 772 FPS
- 4- 808 FPS
- 5- 853 FPS
- 6- 880 FPS
- 7- 889 FPS
Upvote 0
I mostly shoot Exact 18.1, the 25, and H&N Baracuda 21.1. There's a very small point of impact change with the 25 Exact's, but not much with the Baracuda 21.1's
It has very much the same point of impact with those three. I haven't tried the Baracuda 18.1 yet, but I'd imagine that they would shoot well also.
As for the hammer spring, It's set to 5 right now. My range is fairly short so I don't need a lot of power. As measures with the 21.1 Baracuda's, the FPS is about 867. Again, no need to push everything hard if you don't need the higher speed for longer ranges.
Mike
It has very much the same point of impact with those three. I haven't tried the Baracuda 18.1 yet, but I'd imagine that they would shoot well also.
As for the hammer spring, It's set to 5 right now. My range is fairly short so I don't need a lot of power. As measures with the 21.1 Baracuda's, the FPS is about 867. Again, no need to push everything hard if you don't need the higher speed for longer ranges.
Mike
Upvote 0
SET YOU HAMMER ADJUST PIN OR SCREW TO 4.5MM TO 5MM IS WHATS REALLY GOOD FOR 16AND 1 GR PELLETS GOTTA TAKE ADJUST OUT TO MEASURE IT
Upvote 0