Tuning Fx

[Eddy1840]

Did fx has better o’rings o regulator for the fx impact gen 1 mine always has given me the same problem.. I when shooting after like 2 years and leave the rifles in the truck two days today I bring them in and nothing the reg gauge was showing the bottle pressure, after checking it notice this 

I already replaced them and switched the barrel for a .22 tomorrow I’ll be doing the tuning..

 

[biohazardman]

Sometimes when adjusting people go past the point of no return on reg adjustments and the o-rings get damaged as a result. I think it is a pretty common problem. Might blow out completely right away or, if only slightly damaged, cause a leak later

I think the quality of o-rings has slipped over the years as well. Good that you were able to figure it out and that it is not too difficult to replace.

 

[Eddy1840]

At the beginning I was scared. Now I don’t lol I have been working on my compressor and others rifles 

 

[Long_Gun_Dallas]

I'd measure and get some buna 90 replacements from a reputable source (orings are SUPER cheap) may as well measure and order whatever ones you think you may need in the future. Shipping is like $5 but a whole slew of orings is maybe $1



https://www.oringsandmore.com/metric-b90-orings/

 

[Eddy1840]

I'd measure and get some buna 90 replacements from a reputable source (orings are SUPER cheap) may as well measure and order whatever ones you think you may need in the future. Shipping is like $5 but a whole slew of orings is maybe $1



https://www.oringsandmore.com/metric-b90-orings/

Thanks I’ll check it out for future problems. 

 

[Odoyle]

Use divers grease too.

 

[tor47]

Just make sure your problem is not what Ernest Rowe describes in this video https://www.youtube.com/watch?v=ubNmXuZ_iI0

 

[Bigragu]

Can someone list the metric o ring sizes that all go on the impact mk2 regulator please? Much appreciated