The gun works as should and has a 500cc 4500psi bottle. The REG is set to 3100psi. Barrel length is now 20" instead of 28" which is about a pound of weight shaved off along with the shroud, it is still threaded for 1/2x20. It has a Hajimoto 2 stage trigger that is amazingly predictable and accurate.
With the HST turned in most of the way it acheives 92fpe (890) with 52gr slugs, I've since brought it down to 905fps with the FX atomics
Ammo it likes:
52gr Griffing,
50gr Varmint Knocker
44.75gr Hybrids (need to be closer to 980fps)
Fx Atomics
I have not tried other ammo, for slugs the gun preffers the Griffins and VK and in that order. It does not like to shoot the Hybrids in the current setting. But you can adjust the hammer spring however you like.
It is somehow one of the quietest airguns I have shot now. About as quiet as an Akela or Marauder. OAL length is 44" with the moderator attached. Factory length is 48" without one.
Edit : Current tune I get 21 shots from 4500psi - 3800psi.
AOL w/ mod 44"
Included:
4 mag, 2 7rd rd and 2 11rd mags
Some ammo
Mod
Black carry case
Hajimoto Oring Kit and probe seal (not oring) and schematic.
You will need tall rings to clear the haji mags. I will also include some .30 ammo.
Price $425 shipped
With the HST turned in most of the way it acheives 92fpe (890) with 52gr slugs, I've since brought it down to 905fps with the FX atomics
Ammo it likes:
52gr Griffing,
50gr Varmint Knocker
44.75gr Hybrids (need to be closer to 980fps)
Fx Atomics
I have not tried other ammo, for slugs the gun preffers the Griffins and VK and in that order. It does not like to shoot the Hybrids in the current setting. But you can adjust the hammer spring however you like.
It is somehow one of the quietest airguns I have shot now. About as quiet as an Akela or Marauder. OAL length is 44" with the moderator attached. Factory length is 48" without one.
Edit : Current tune I get 21 shots from 4500psi - 3800psi.
AOL w/ mod 44"
Included:
4 mag, 2 7rd rd and 2 11rd mags
Some ammo
Mod
Black carry case
Hajimoto Oring Kit and probe seal (not oring) and schematic.
You will need tall rings to clear the haji mags. I will also include some .30 ammo.
Price $425 shipped
Last edited:
