Gamo Gamo swarm magnum multishot to singleshot...

[Zeke G.]

Hi all,
Can I convert my gamo magnum swarm multishot into a single shot by just removing the multishot mechanism? I've looked for the answer but can't seem to find the info.
This is a gen 2 rifle. I bought it years ago and finally decided to shoot it. Didn't like me not in charge placing the pellet in there.
Zeke

 

[marflow 777]

https://www.pyramydair.com/airgun-r...58MlKgYv2vmmx0G22o_3TOGIx1wbXwDwx1n3hZ374dAzb

it appears you can take it of the instruction are in the manual but i have no idea what you have after removal
page 12

 

[SilentSquirrel]

I recall reading a thread about doing that to a Whisper Fusion Gen2
However, I cannot remember if it was here on AGN or on GTA
I can search later tonight, but you might as well get a head start @Zeke G.

Hope this helps
Edward

 

[Zeke G.]

I recall reading a thread about doing that to a Whisper Fusion Gen2
However, I cannot remember if it was here on AGN or on GTA
I can search later tonight, but you might as well get a head start @Zeke G.

Hope this helps
Edward

Did search and found some info on gta. Seems you just remove the mechanism and it's a regular break barrel. I'll report my efforts if anyone is interested.

 

[Sawney Bean]

I did just that with my gen3. It works a lot better without that kludgy magazine mechanism. I gained a lot of consistency and about 25 fps. Before I removed the magazine system velocities would vary up to 150 fps. Afterwards it was about 25 fps of variation and 25 fps higher velocities than the peak velocities I was getting earlier.