I added two .010 washers and reassembled everything. I filled the bottle to 3000 psi. I screwed on the tester. When I opened the valve on the tester it seemed to require more effort than normal. Once opened the gauge read 3000 psi.
I took the regulator apart looking for problems but nothing appeared wrong. I repeated the test at 2000 psi in the bottle and got 2000 on the tester gauge.
Does anyone know what might be going on here?
I took the regulator apart looking for problems but nothing appeared wrong. I repeated the test at 2000 psi in the bottle and got 2000 on the tester gauge.
Does anyone know what might be going on here?