Anyone know where I can a Gen 1 marauder repaired? Leaking at the external pressure gauge threads replaced the Oring didn't fix the leak.
Benjamin Gen 1 marauder repair
- Thread starter cmr6728
- Start date
Maybe have a look at this article?
hardairmagazine.com
Benjamin Marauder Pressure Gauge Change - Vital Information
All companies make ongoing improvements to their products. RecentlyVelocity Outdoor has made a Benjamin Marauder pressure gauge change.
hardairmagazine.com Upvote 0
It would cost more to ship it to get repair and ship back. Marauder is an easy fix. You need to degass the gun. Take the gauge port out. There are 2 o rings on each side. Replace the 2 o rings. Slide it back in. So easy an cave man can do it.
Upvote 0
Either one or both of the O-rings on the gauge block are leaking (Item 14 on either end of Item 3) most probable. Or, the gauge is leaking (Item 36 to 37). Or the O-ring at the bottom of the gauge thread, also likely culprit (Item 35).
O-ring chart:
O-ring chart:
Upvote 0
When you replace the o-rings do not tighten as if you are Rambo.
Finger tight and 1/4 turn more..
Finger tight and 1/4 turn more..
Upvote 0