I think it is hard to get the right metal targets for .177 FAC airguns in Danish / EU B&M sores.
Either they are too weak and get destroyed. ( have done this to a few Gamo branded ones )
Or like i found out with my last purchase too strong and can barely activate.
So the 3 in 1 spinners, sure can spin the 2 small ones at 30 M with a 10 gr pellet, but the big spinner i can only rock back and forth with a 13 gr slug.
Clearly my plan of putting these up at increasing distances, well it is not going to spin, so i will have to rename them swinger targets.
The duelling tree one, wayyyyy too strong springs on it, for sure made for .22 LR, but fortunately my friend had some weaker springs so it now work at 55 M and can be flipped back and forth even with a 10 gr pellet, and at least 13 gr slugs do not overpower it and get flipback.
Once in a rare while we will get a 50% flip and so the paddle will be stuck out of sight, for a little while before hitting others make it flip to within sight on a side.
I love these KYL ones, but i am sure we would only be able to rock them a little back and forth.
And its not like i would assume full spin on a good hit at distance, but at least significant swinging back and forth.
We have been talking my friend and i, a local 4X4 shop which we used a lot back in the land Rover days and we are very friendly with, they have a plasma cutter and a welder, so i am thinking maybe we can whip up something ourself.
Crossing all there is to cross for a " now selling in EU thru ? " announcement.