N/A Getting fed up

[beerthief]

if i got a drooping barrel gun i would keep sending it back under warrantee till i got a good one .

 

[Bandito]

Hateful McNasty that was the greatest cartoon. Have had a version of that years ago when I used a Marlin 39 A, and was out of ammo! Be Well Brothers, Bandito.

 

[harrympope]

I tuned 2 of them out of the box last year. The barrel takes about 5 seconds to bend up level.

I just did the same with an old RWS 34.
took a few minutes and now the rear sight it zeroed.I bent it to zero windage as well.

 

[c_m_shooter]

Well I'm sure it's easy but I don't have a vise to do something like that. I honestly like the looks of the hunter with the sling swivels in 177.

I don't have a vice either, but there is a forked tree in the front yard. Don't bend too much, it would be hard to go the other way.

 

[SteveP-52]

I would love a good 20cal but they are like hens teeth.

Another one to consider and posted on Airgun Warriors classifieds. Bit rough Beeman R1 .20. He's asking $600 plus shipping but factor in that the period correct Beeman SS2 scope and 1 piece mount is included and alone sell anywhere from $250-$300+ on auction sites. He's also including an original Beeman Pell Seater which sell around the $50 mark, so even if you didn't want them, you could recoup some of your money selling them later on.

https://airgunwarriors.com/classifieds/show-ad/37687/beeman-r1-20-cal-santa-rosa-w-beeman-66r-scope/airguns-springers/

 

[Chuck-in-Ohio]

I don't have a vice either, but there is a forked tree in the front yard. Don't bend too much, it would be hard to go the other way.

I use the fork in my shootin shade tree right beside my bench.

 

[Sawney Bean]

if i got a drooping barrel gun i would keep sending it back under warrantee till i got a good one .

+1. I might expect that kind of thing on a low priced Chinese or Turkish gun, but if I'm spending $400 or more on a rifle they ought to at least make sure the barrel and the dovetails line up.

 

[drsquall]

+1. I might expect that kind of thing on a low priced Chinese or Turkish gun, but if I'm spending $400 or more on a rifle they ought to at least make sure the barrel and the dovetails line up.

Yeah, I'm not going to go through that effort when it should come that way

 

[mh]

I would recommend that you post it in the classified. The forum has a few rules that you need to get under control first though.

 

[DeutschKSK]

HW80 long range hunter.. drop a vortek in it and it’ll be perfect.

 

[drsquall]

I just got a hw 97k in 20cal blue laminate. Also, just did some trading for a RX2 in 20cal and a 98 in 177.

 

[mdub98]

I would recommend that you post it in the classified. The forum has a few rules that you need to get under control first though.

Where are the rules posted and I didn't say i was actively selling it I responded to someone who said they haven't been able to find own that's absolutely ridiculous.

 

[fishing43]

I just got a hw 97k in 20cal blue laminate. Also, just did some trading for a RX2 in 20cal and a 98 in 177.

The rx2-20 is a great rifle for squirrel hunting. Heck all 3 you listed are great rifles.

 

[drsquall]

The rx2-20 is a great rifle for squirrel hunting. Heck all 3 you listed are great rifles.

Yeah it's the laminated stock in the rx. I have my old Benjamin pump and just order the fill adaptor from best fittings so I can tune it. Now to get some scopes for them.

 

[cavedweller]

Well, I have been into pcp for a little over a year now and my second compressor is going on the frits. I have way too many PCPs I think so I'm going to thin the heard and just have 3. I have always had springers, piston or gas rams.
I am wanting to get one for a dedicated hunting gun in 22. I have asked this before but best bang for the buck? What about a 95/r9, Diana 350, or a good gas ram? I sold my lefty tx200 and all I have is a 54 in 177 setup for FT and an old Remington npss in 22. Slings are nice and weight about 10lbs with scope. Sorry if I keep asking but this pcp game is getting to be a pain in the arse!

Jon

A good compressor and two air tanks can solve the issue … I also believe in quality products with excellent warranty like Brocock or Daystate !

 

[cavedweller]

The Airguns are not the problem. This is my 3rd compressor and this has less than 2hrs on it

Alkin or Bauer!

 

[drsquall]

A good compressor and two air tanks can solve the issue … I also believe in quality products with excellent warranty like Brocock or Daystate !

I've slowly reduced my pcps. I've got 4 left now.

 

[drsquall]

I think I'm going to reduce the pcp fold to maybe 2. Just losing interest in them. I will always have my k1 in 22 best hunting gun in my opinion and maybe my impact in 25. I just got an avenge x in 177 might keep it. Going to start getting more and more pistons.

 

[crosman2016]

Well, I have been into pcp for a little over a year now and my second compressor is going on the frits. I have way too many PCPs I think so I'm going to thin the heard and just have 3. I have always had springers, piston or gas rams.
I am wanting to get one for a dedicated hunting gun in 22. I have asked this before but best bang for the buck? What about a 95/r9, Diana 350, or a good gas ram? I sold my lefty tx200 and all I have is a 54 in 177 setup for FT and an old Remington npss in 22. Slings are nice and weight about 10lbs with scope. Sorry if I keep asking but this pcp game is getting to be a pain in the arse!

Jon

I really cannot afford the price of all the gear. I suppose once one is all "geared up", it isn't so bad after that, but the price for a top tier compressor is just more than I can spend.

 

[drsquall]

I really cannot afford the price of all the gear. I suppose once one is all "geared up", it isn't so bad after that, but the price for a top tier compressor is just more than I can spend.

Well I just have used cheap compressor to fill my guns but I have had 2 break. Like I said I'll keep my huben for sure and the others who knows. I am going to sell the Aveng x in 177