The GK1P (Perfected) is almost finished, I need to check more tolerances with test prints and polish a few things, but you whould have it soon on cults along with my loading gate and moderator and treat correction mod.
In resume, is a new handle that eliminates the waste of space of the original (that protudes far beyond the upper slide) and incorporates an adjustable power wheel on the base with indicator (up to 4 revolutions, can be limited with add on piece to comply with local airgun laws), plus detachable rear stock, plus optional piccatiny rail down the tank, wich I found it pretty stupid but people like those.
I also changed the trigger system, now its press on instead of rotation axis, I like those more, less prone to double shot than the original I think, the rotation still happens and no extra pieces needed, the trigger itself push a rotation lever, that allow to place the trigger further, even made custom ones to fit position.
Now the things I want to know... I only have a V1, so all is based on that, It should work on a V3 as long as everything is on the same place.
Mi question... the power adjust valve on the V3 seems a bit shorter that in V1, that forces me to design a variable length power wheel, you use a real allen key fitted inside (just saw cut a little chunk of it, or 3d print one if you have acces to stronger plastics...) but I still want to know if the valve is on the exact same spot (just shorter) or not, cause if not I'm pretty much screwed.
Besides the allen key, you only need a shorter bolt to place it on the same spot that the original, you can cut the original... but better not to to destroy anything of a so much stupidly expensive pistol.
Are there any other differences on the down part of the gun beetween V1 and V3? caus I REALLY need to know that before put the thing to download.
Last edited:
