Got tired of waiting for a used Ninja Filling Station

Looks a lot like the one I got from Joe B. this thing is sweet. Came with the male qd on the inlet side two gauges and a 80" inch micro bore line on the output side.
ab831ccfebbad5f58faec8fac4fef968.jpg
 
I like Joe B but I don't like his prices. I added a hand tight CGA347 adapter and a bleeder with female quick disconnect. I have two 36" micro hoses that I can use either with my fill assembly or with the external regulator. I will normally keep the output at 3k psi so with the bleeder I do not have to turn the adjustment knob to bleed off the air, but keep it set to 3k psi.

 
"Hammer47"I prolly should have bought both at that price so I could have passed one along but I sure did not need 2 of 'em.
I had a WTB for a therering rig on all three major forums and didn't get any bites, so i went ahead and pulled the trigger. I wish I knew about that deal. I paid $319 for the reg and gauges. I already had the other fittings I needed. 
 
"Hammer47"It's a nice regulator though. Look at the bright side Bubba, if you own it a hundred years, it only costs $3.19 per year...or $.26 per month...or $.0087 per day............hell THAT'S CHEAP. It's all in how you look at it....at least that's what my wife says.grin.
Oh I don't have any major regrets. I checked several places and it was priced about the same everywhere.