Parts from my GX CS2 Compressor - failed due to large gear in lower end. All these parts were working fine when compressor failed.
Parts List:
Power supply ($50 at GX Pumps website)
On/Off Switch ($20 at GX Pumps when available)
2 Working Fans ($30 at GX Pumps)
Replacement Bleed Valve for CS2, CS3 and CS4 (from front of compressor) ($20 at GX Pumps)
Cylinder cover with all 4 bolts with washers, working check valve and foam handle with air intake.
Complete front half of compressor block - contains complete check valve assembly. The block has undamaged cylinder walls. The block has both isolation feet (2 of the 4 bolts
Wrist pin that connects piston to piston rod. This is the better earlier version of the CS2 Wrist pin that has the grease hole in the slot.
Complete working piston assembly. The piston has a torn top hat. These top hats are available from GX as part of their $20 maintenance kit for the CS2.
Red cover with all 4 screws
Wiring with alligator clamps
Lots of insurance parts to keep your GX CS2 running
$75 for everything - buyer pays shipping - USA only
-Ed
Parts List:
Power supply ($50 at GX Pumps website)
On/Off Switch ($20 at GX Pumps when available)
2 Working Fans ($30 at GX Pumps)
Replacement Bleed Valve for CS2, CS3 and CS4 (from front of compressor) ($20 at GX Pumps)
Cylinder cover with all 4 bolts with washers, working check valve and foam handle with air intake.
Complete front half of compressor block - contains complete check valve assembly. The block has undamaged cylinder walls. The block has both isolation feet (2 of the 4 bolts
Wrist pin that connects piston to piston rod. This is the better earlier version of the CS2 Wrist pin that has the grease hole in the slot.
Complete working piston assembly. The piston has a torn top hat. These top hats are available from GX as part of their $20 maintenance kit for the CS2.
Red cover with all 4 screws
Wiring with alligator clamps
Lots of insurance parts to keep your GX CS2 running
$75 for everything - buyer pays shipping - USA only
-Ed
