Gx CS3i - brand new - shuts off at 250 bar

Jump to latest Follow Reply
S

Skiffy52

Member
Nov 25, 2022
16
7
Berlin, Wisconsin, USA
I just received my brand new GX CS3i - ordered off of Amazon. I also just got my brand new Uragan 2 - went to fill it for the first time and the GX CS3i shuts itself off when the gun reads 250 bar.
I have tried it a few times now and every time, the compressor shuts down completely - no fans, no lights, and I have to reset the main power switch on the compressor to get the fans to come on. What I have tried:
- a different outlet to ensure that the compressor can draw full current
- restarting the compressor to try to get more than 250 bar in the gun

Has anyone else had this happen? Any suggestions?
 
WorriedMan said:
My Uragan 2 and Vulcan 3 are happy with 250BAR, tried 300 but Yong Heng was straining, recommend 250. WM
Click to expand...
I will probably run it around 250-280 bar fill, but I really want to know why the brand new compressor shuts off. It's like an internal (to the compressor) breaker trips and shuts the whole unit down. Its troubling that the cooling fans also shut down when it happens. And since it's brand new, it seems like it is only going to get worse with time and use.
 
Upvote 0
Skiffy52 said:
I will probably run it around 250-280 bar fill, but I really want to know why the brand new compressor shuts off. It's like an internal (to the compressor) breaker trips and shuts the whole unit down. Its troubling that the cooling fans also shut down when it happens. And since it's brand new, it seems like it is only going to get worse with time and use.
Click to expand...
Sorry, more familiar with the Yong Heng, hope a GX CS3i owner will chime in. Best of Luck, WM
 
  • Like
Reactions: Skiffy52
Upvote 0
I have this same compressor and loved it in the beginning, but now I’m working on it more than I’m using it.
Mine shuts off just as yours does without the fan. It seems as though it may be going off because of thermal overload and I’m staying within the run time boundaries that have been set in the owners manual.
This compressor would be everything I would want, if it was not so problematic.
sorry that I was not any help…….maybe there is someone that has more knowledge of this compressor and will chime in.
 
  • Like
Reactions: Skiffy52
Upvote 0
Jake W. said:
I have this same compressor and loved it in the beginning, but now I’m working on it more than I’m using it.
Mine shuts off just as yours does without the fan. It seems as though it may be going off because of thermal overload and I’m staying within the run time boundaries that have been set in the owners manual.
This compressor would be everything I would want, if it was not so problematic.
sorry that I was not any help…….maybe there is someone that has more knowledge of this compressor and will chime in.
Click to expand...
I contacted GX about the issue. They ended up sending me a video of one of their workers removing an internal breaker. With the breaker removed, the power wire inside of the cabinet was reattached in its place. I performed the operation and mine works great now. I asked GX if they needed to send me a new breaker and they told me that it was no longer needed. I don't know how to post the video here, but if you send me a direct message with your email address, I can forward it to you for you to try.
 
Upvote 0
Skiffy52 said:
I contacted GX about the issue. They ended up sending me a video of one of their workers removing an internal breaker. With the breaker removed, the power wire inside of the cabinet was reattached in its place. I performed the operation and mine works great now. I asked GX if they needed to send me a new breaker and they told me that it was no longer needed. I don't know how to post the video here, but if you send me a direct message with your email address, I can forward it to you for you to try.
Click to expand...
I would ask them for a replacement breaker if it's still in warranty. Otherwise I would put in my own replacement.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu