I just received mine and really like it. But it's so vibration free that it's not registering on the stick on vibration hour meter I've used on other compressors.
What are any of you using??
What are any of you using??
GX CS4 Hour meter
- Thread starter dens228
- Start date
I have mine stuck near the top edge just above where it says GREASE POT. This is right above the compressors head and the point of most vibration. Mine has been working well in that location for over 7 hours of use.
Upvote 0
I had to get one with two sensitivity levels and set it to the higher setting. For me attaching it right where the GX stencil is to the right of the bleed screw worked, and a couple other areas I tried did not.
Upvote 0
I got this one: https://www.amazon.com/gp/product/B0C2XZ3SYV
Powers on and lights up with power switch, counts time when compressor starts.
Powers on and lights up with power switch, counts time when compressor starts.
Upvote 0
I moved the meter over a bit and it works. I love this compressor so far.
It fills my little Krait 300 cc bottle from 125 bar to just under 300 bar in about 2 minutes or less......lol
It fills my little Krait 300 cc bottle from 125 bar to just under 300 bar in about 2 minutes or less......lol
Upvote 0
But of course. 4 wires. Pos, Neg, Backlight, and Counter. Soldered them to the appropriate terminals on the main board.
Upvote 0
