GX L3 AND FILTRATION

[rut]

I just picked up one of these! They are on sale at GX Pumps for $399.00 (regular $599.00) and it ended up being $359.10 after using their discount code (GX10OFF). Amazon is selling them for $459.99, $100 more! @rut, I should have tried your discount code, sounds like you got another $10 off!

GX Pump GX E L3 PCP Air Compressor 4500Psi/320Bar/32Mpa, Paintball Tan

Note: pls contact with us to get a better promotion . PCP Air Compressor——GX E L3 GX pump GX E L3 Airgun Compressor 18V Lithium Battery PCP Air Compressor, 4500Psi/320Bar/32Mpa, Set Pressure & Auto-Shutoff, Built-in Oil-Water Separator & Cooling Fan for Paintball Tank PCP Air Gun Rifle...

gxpumpofficial.com

The specs say it has an internal oil/water separator, but I'm probably going to get a small cotton filter like I'm using on my CS4.

That’s the code I used to. And I meant to type $359.00. I Also got one of the filters for mine from Amazon.

 

[LONESTAR .25]

Sounds good guys. Early last week Amazon had a 80.00 coupon for the unit but it expired Sunday.
Does the factory offer a 3 year warranty that can be purchased like amazon or Walmart?
Thanks for responding
Gary

 

[Hateful McNasty]

Has your battery pack unit in this for a example ..

 

[LONESTAR .25]

Thanks

 

[LONESTAR .25]

I just picked up one of these! They are on sale at GX Pumps for $399.00 (regular $599.00) and it ended up being $359.10 after using their discount code (GX10OFF). Amazon is selling them for $459.99, $100 more! @rut, I should have tried your discount code, sounds like you got another $10 off!

GX Pump GX E L3 PCP Air Compressor 4500Psi/320Bar/32Mpa, Paintball Tan

Note: pls contact with us to get a better promotion . PCP Air Compressor——GX E L3 GX pump GX E L3 Airgun Compressor 18V Lithium Battery PCP Air Compressor, 4500Psi/320Bar/32Mpa, Set Pressure & Auto-Shutoff, Built-in Oil-Water Separator & Cooling Fan for Paintball Tank PCP Air Gun Rifle...

gxpumpofficial.com

The specs say it has an internal oil/water separator, but I'm probably going to get a small cotton filter like I'm using on my CS4.

Looking forward to your review

 

[rut]

Looking forward to your review

Mine has worked great so far. I’ve filled my GHOST several times with it without a problem. Each time I have filled it, it was from 140 bar to 250 bar. Just took a few minutes time. Pretty quiet machine to. Only thing is, I wish the batteries had a discharge meter on them to show their status. But so far the pump has worked great.

 

[LONESTAR .25]

I'd look at what used around in posts and like seen used in theses reviews vids ..

,,(gx-L3 )
View attachment 449690

I assume them quick connect serviceable inline ones do just fine .

I'm leaning to the filter Nasty has here with just cotton I guess.

I found this it's about 7.5 inches and can add other materials with cotton. Would it slow down airing up?

PCP Compressor High Pressure Air Filter Oil-Water Separator with Quick Disconnect

airgunarcheryfun.ca

 

[Hateful McNasty]

I'm leaning to the filter Nasty has here with just cotton I guess.

I found this it's about 7.5 inches and can add other materials with cotton. Would it slow down airing up?

PCP Compressor High Pressure Air Filter Oil-Water Separator with Quick Disconnect

airgunarcheryfun.ca

Does he have the optional beads to add to that ? If so then maybe worth the try .. can't be no worse then guessing at any other to use ..

 

[rut]

This is the filter I’ve been using. Two cotton filters inside. Can also add desiccant beads to the inside of the tube. Works very well. Got it off Amazon. $16.00.

 

[LONESTAR .25]

Does he have the optional beads to add to that ? If so then maybe worth the try .. can't be no worse then guessing at any other to use ..

I hear that..lol

 

[LONESTAR .25]

This is the filter I’ve been using. Two cotton filters inside. Can also add desiccant beads to the inside of the tube. Works very well. Got it off Amazon. $16.00. View attachment 450412

Hey Rut
If using the beads us there a canister inside the main tube to hold them?

 

[rut]

Hey Rut
If using the beads us there a canister inside the main tube to hold them?

No canister. It’s just the hollow inside of the tube. The cotton filters are very small, tucking into each end of the tube, leaving the center portion of the tube relatively wide open for the desiccant beads.

 

[LONESTAR .25]

No canister. It’s just the hollow inside of the tube. The cotton filters are very small, tucking into each end of the tube, leaving the center portion of the tube relatively wide open for the desiccant beads.

I don't know, just asking would there ne any bad chemical reactions with having beads against the metal?

 

[F6Hawk]

I don't know, just asking would there ne any bad chemical reactions with having beads against the metal?

Desiccant? Probably not to no, depending on the quality of the material. (Opening the filter after every use and drying it out would likely mitigate this)

Molecular Sieve? Absolutely.