HP MROD Exp Mag - Hajimoto Productions LLC
Here is a high-quality, high-capacity magazine designed to fit the Benjamin Marauder rifle in .177, .22, and .25 calibers. This magazine extends your capabilities by increasing the number of shots before requiring a reload. WILL NOT FIT THE BENJAMIN MARAUDER PISTOL There is no need to preload...
hajimotoproductions.com Just spent 30 minutes on the phone with the owner of Hajimoto Productions. Among other things, I had ordered an expanded magazine which he had advertised as fitting both the Marauder rifle and Pistol. We all know that the stock Benjamin mags are different on both the MRod and PRod. However, since he was 3D printing them I figured he knew what he was doing. Sure enough, the magazine would not function in my PRod. I sent him an email and within a day he had responded and was surprised it did not function since he had sold "thousands" of them. He ask for a couple of photos so he could see the mag inserted into my PRod. I showed him photos of how the pellet was angled sharply downward when I tried to insert it into the breech. I also let him know the pellet probe would not travel home through an empty mag. I offered to send it back to him and pay the $5 difference for some newly designed and improved Akela air strippers which he had advertised.
We he called me shortly afterward and was very apologetic and admitted the mag was not supposed to be advertised to fit the PRod. He even had a previous email from me ascertaining the mag would fit my PRod, which he had not answered. Well, he would not let me pay the $5 difference for the air strippers and told me to keep the MRod mag and he was going to send me the Air strippers at no cost to me. I insisted he let me pay him the difference, but he refused any payment, saying he was in error and he wanted to make sure I was taken care of. Turns out he is a big supporter of the military and me being a retired Naval Aviator, we had a long talk about it. He is also a retired mechanical engineer and he prides himself in the quality of his work.
I would recommend you visit his site to see if there is anything you could use. He is a great guy and worthy of our support.
Last edited:
