Hand Pump Question

[MP44]

I am pretty sure but thought I would get a second opinion. All I would need to do to add a hose to the pump pictured below is remove the DIN adapter and screw in the hose? In other words, both the DIN and a standard pump hose has the same 1/8" BSP threads? 

Before anyone mentions it, I have a long micro hose from JoeB so it would not cover much of the gauge

 

[Tominco]

I don't know about that pump in particular but, this might help you out. 
Tom

 

[MP44]

It is a Gehmann branded FX pump

 

[John "spysir" Blount]

Tom linked a great thread thread ( couldn't help it) so figuring it out will be easy.

Had the first Blue FX hand pump - and a gen 3 - it had the 1/8th BSP threads

Jojhn

 

[aa_limited]

get a hill mk4 or 3 pump

 

[MP44]

"aa_limited"get a hill mk4 or 3 pump

I have a MK3 that I purchased new that needs a rebuild, which I have a kit on the way. I thought it would be nice to have a back-up pump that wasn't Chinese and didn't cost $300