Im wondering if this is an issue just on my gun, Has anyone else tried turning up the power on the hatsan blitz past 4.3 turns out from all the way in on the hammer in .25 cal or .30 and ran full auto mine does not seem to work full auto it jams the bolt handle runs 1 round out of the 41 round mag an gets caught on the 2nd round the pellet gets caught right before it hits the barrel I push it thru an take the mag out an push a barrel rod to and I see the pellet had ran into the side before it can get centered into the barrel it had a dent where it ran into the side before it can enter the barrel happened with slugs and pellets when I was at 7 turns out I found out after testing it wont run full auto past 4.3 turns outward from fully turned in on hammer spring. I want to get more potential as I use to be able to expand the 46 grain h an n slugs 80% of the way in gel 1 foot away now they hardly expand so I defiantly lost some power, Has this been the case for anyone else with the blitz in .25/.30 cal or is it just my gun.