Hatsan Carnivore?

I had intentions of modifying, but decided to keep it stock. Here is a bit of a chronicle, now with several thousand through the barrel: http://www.gatewaytoairguns.org/GTA/index.php?topic=85815.0 

Im very pleased with, especially for the price. It is very quiet with the QE, although you can remove the shroud and attach a 1/2 20 threaded LDC. Neighbors are not an issue for me, but young slepping children are :) In fact, that is when I shoot and is nit noticeable from people in the house.
 
"JDShapp"Definitely going to do a little more research on on these. If I do pick one up in the future it'd be a .30 cal. It'd be stock or close to it for shot count.
The really great thing about Hatsan airguns are the removable air tube. For $150 you can get an extra tube and double your shot count without adding to the weight of the gun. 
 
Normally I'm not a fan of auto safety, but if anything my Texan has taught me its a good thing on big bores. Plus the .30 pellets are about the same cost as .25 on Amazon and the count per tin is the same too. That and the price was right for a new one at just under $680 there as well.

If its as quiet and as accurate as I hope it is then it'll be my go-to gun for night time hunts.
 
"JDShapp"Normally I'm not a fan of auto safety, but if anything my Texan has taught me its a good thing on big bores. Plus the .30 pellets are about the same cost as .25 on Amazon and the count per tin is the same too. That and the price was right for a new one at just under $680 there as well.

If its as quiet and as accurate as I hope it is then it'll be my go-to gun for night time hunts.
Took me a bit to get used to the safety, being on the opposite the bolt and not being able to reach without removing my hand from shooting position. Mine is reasonably quiet and certainly does not sound like a gun when fired, causing any alarm to someone close enough to hear it. My non-QE is much louder, which I still dont think sounds as much like a powder burner. My AF Condor however.............

I will have to check out Amazon for pellets, never have. We are at least seeing some other options if you cast, with JBS and BBTs, and production ammo for those of us that dont, H&N may be offering in 2016. Neilsonammo mentioned doing some swaged. As I found with the HPs, it depends on how they will be supported in the magazine to seat correctly.