Hatsan Hatsan Flashpup .25 vs Flash .22?

[Maximus_Pain]

Hello

I hope all are doing well.

I own both a Hatsan .25 Flashpup in wood and a Flash synthetic in .22.

The Flash .22 is modded,

Flash mods:
Exhaust valve seat enlarged
Exhaust valve port enlarged to .2"
Transfer port enlarged to .2"
Barrel port enlarge to .155"
Huma Regulator set to 110 psi
Hammer weight reduced by 8 grams
Hammer spring out 1 turn
Shot count: 32
Spread 23 FPS
STD Dev: 5 FPS
Average: 880 FPS JSB Hades 15.89 grain
*I'm still tuning these JSB Hades
*Some o-rings require replacement due to taking the gun apart so many times during tuning

The Flashpup .25 is in original form.

???Questions???

1. Are the actions of both guns the same since they carry the same part number? Meaning, are they swappable between guns?

2. Would a stock flash action in .22 have the same size transfer port as a stock flashpup in .25?

3. Would I be able to swap chassis between these two guns? As in, swap modified parts (barrel, action, exhaust valve) from the flash to the Flashpup, making the Flash .25 and Flashpup .22?

I'm just trying to see if anyone out these knows these answers before I tear my Flashpup apart and begin modding.

Thanks!

 

[timmah]

Hatsan publishes parts diagrams of most of their airguns here:

HatsanUSAExploded Product Diagrams

Linked below are Exploded Parts Diagrams for Hatsan Airguns offered by HatsanUSA. These are also occasionally referred to as Schematics. If you are looking for a diagram not in the list below, p…

hatsanairgunsusa.com

They do have both the Flash and Flashpups listed, so you could just compare the parts shown to see how similar or dissimilar they are. I suspect they share 99% of their parts.