Daystate Hello, new to forum. Need recommendation for Daystate Huntsman Classic service

[Eworth]

Let me reach out to @Ozark aka Casey. He is pretty good with that stuff and lives down there. Super nice guy.

I sure would appreciate that. Thank you! Really like to learn by doing with a knowledgeable person guiding me in person

 

[Eworth]

Daystate Regal Teardown Guide

Some have shown some interest in this so I thought I'd share what I've learned on taking apart the Daystate Regal. Who knows it might save a trip back to AOA. I've had mine completely down to the valve and replaced a seat to stop a small leak I had a couple of years ago. Step one, remove the...

www.airgunnation.com

Here is a tear down guide. Pretty basic rifles.

Thank you for sharing that.! I’ll check it over.

 

[Joedirt199]

Talked to Casey. He is not super familiar with those but will check it out and see what he thinks. He may reach out to you about it.

 

[Eworth]

Sounds good and I do appreciate it

 

[Ozark]

Sounds good and I do appreciate it

Good Afternoon, I would be willing to take a look at your Rifle. I have not personally broke down a Daystate Huntsman, but have Resealed/Serviced many FX Impacts so the Daystate should be pretty straightforward to reseal.

How close are you to the Ozark, MO area?

 

[Eworth]

Good Afternoon, I would be willing to take a look at your Rifle. I have not personally broke down a Daystate Huntsman, but have Resealed/Serviced many FX Impacts so the Daystate should be pretty straightforward to reseal.

How close are you to the Ozark, MO area?

I live in Ozark. This is perfect!

 

[anirudh]

enclosing the o rings you require for the Classic overhaul.(pdf file)...if its the same PCP..mine is a 177 FAC..however youll require a special tool to remove the innermost valve (see the attached photo which shows the innermost valve and this tool) which i had to assemble etc myself locally.also attached is the daystate huntsman classic parts diagram

View attachment DAYSTAE HUNSTMAN CLASSIC O RINGS.pdf