Can any one tell me the factory tune to .22 and .25 please?
.22 600mm and .25 700mm barrels.
Any help will do.
.22 600mm and .25 700mm barrels.
Any help will do.
Tuning Help factory tune Impact M3
- Thread starter Berto1
- Start date
I have the .30 Caliber tune, but it took a 5-minute phone call to FX USA to get. Their number is on google, they usually answer the phone pretty quickly, gotta call before 4 I think.
Upvote 0
Here are the factory tunes for the requested configurations:
Impact M3 .22 caliber 600mm (Standard)
Reg 1 = 150 Bar, Reg 2 = 75 Bar, Hammer Macro = 16, Hammer Micro = 1.5-2, Valve about 4 lines, pellet 16gr @ 920-930 FPS
Impact M3 .25 caliber 700mm (Sniper)
Reg 1 = 150 Bar, Reg 2 = 95 Bar, Hammer Macro = 16, Hammer Micro = 2.5, Valve about 4 lines, pellet 25.4gr @ 930 FPS.
These numbers and settings are bond to vary slightly, as there is more than one person to tune every single rifle that leaves the factory in Sweden. Also, if you have asked your dealer to make a caliber change, then the settings will most likely what they have found the best tune at, rather than these "starting" settings provided by the factory.
Please give us a call or send us an email if you have any questions.
Monday - Thursday 9 AM - 4 PM EST
Fridays 9 AM - 3 PM EST
Phone: +1 866 639 0772
[email protected]
- FX Airguns USA Tech Dept
Impact M3 .22 caliber 600mm (Standard)
Reg 1 = 150 Bar, Reg 2 = 75 Bar, Hammer Macro = 16, Hammer Micro = 1.5-2, Valve about 4 lines, pellet 16gr @ 920-930 FPS
Impact M3 .25 caliber 700mm (Sniper)
Reg 1 = 150 Bar, Reg 2 = 95 Bar, Hammer Macro = 16, Hammer Micro = 2.5, Valve about 4 lines, pellet 25.4gr @ 930 FPS.
These numbers and settings are bond to vary slightly, as there is more than one person to tune every single rifle that leaves the factory in Sweden. Also, if you have asked your dealer to make a caliber change, then the settings will most likely what they have found the best tune at, rather than these "starting" settings provided by the factory.
Please give us a call or send us an email if you have any questions.
Monday - Thursday 9 AM - 4 PM EST
Fridays 9 AM - 3 PM EST
Phone: +1 866 639 0772
[email protected]
- FX Airguns USA Tech Dept
Upvote 0
Antman If you will , shooting what brand/grain pellet or slug. velocity obtained, and general accuracy are you getting
Many Thanks
Many Thanks
Upvote 0
What’s the setting for .177 600mm?
The book said reg 2 at 80-85 but that’s higher than .22 at 70-75.
Any thoughts?
The book said reg 2 at 80-85 but that’s higher than .22 at 70-75.
Any thoughts?
Upvote 0
Upvote 0