Tuning Help needed TX200 SR Webley Venom Piston Seal

[Lewis]

Looking for a replacement piston seal for a 25mm Webley LazaGlide.

A factory 25mm seal does not fit as the center diameter is too large. 

Any ideas who would have them?

 

[thumper]

Have you tried a Weihrauch seal on it by chance? Sure looks like a Weihrauch piston nose. If I get back to the shop tomorrow I'll measure a 25mm Weihrauch piston for you. 

 

[JohnnyPiston]

Lewis you'll need a 25mm HW piston seal. The HW piston seal conversion was a common Venom and later V-Mach mod for custom TX200's/PS's. 

My first choice would be a V-Mach 25mm HW parachute grooved seal to keep the internals as true to form (Venom DNA). Hard to find, but they are out there. 

Second would be an Aussie 25mm seal, the red moly impregnated ones. 

 

[Lewis]

Thank you both.

Johnny,

Do you have any of the V-Mach 25mm seals? I would take 2 if you want to part with them.

 

[JohnnyPiston]

Lewis, I sent you a PM.

 

[Lewis]

Major thanks to both Johnny and Thumper who correctly identified it as an HW converted seal and especially to Johnny who is a wealth of knowledge on these particular builds. It is all back together with the best of lubricants and the perfect seal. Better than new, and new was pretty special.

Thanks again.