Hello right I just bought a gunpower stealth and to be honest it seams very underpowered is there any good recommend company's that do parts for these I am not sure what I should be swapping to get it shooting as it should as I'm quite new to precharged air guns any help would be much appreciated.
Tuning Help please.
- Thread starter Lurcher4
- Start date
What kind of valve do you have and what fpe do you get?
If you can't exceed about 30 fpe then you may need a hi-flow valve and a heavier hammer (maybe spring, too). There used to be a huge amount of tuning info on the old "yellow" forum, they had a sub-forum just for Airforce guns.
You can get parts from Asian suppliers pretty cheaply now - but you should try get a ligit airforce valve.
I have an old Condor (or Talon, I can't recall) - originally it was only shooting at about 850 fps with 18 grains, and the power wheel at max. With a heavier hammer I could shoot with higher PSI in the tank but it still wasn't much more powerful. With a hi-flow valve I can easily get over 1,100 fps if I turn up the power wheel.
If you can't exceed about 30 fpe then you may need a hi-flow valve and a heavier hammer (maybe spring, too). There used to be a huge amount of tuning info on the old "yellow" forum, they had a sub-forum just for Airforce guns.
You can get parts from Asian suppliers pretty cheaply now - but you should try get a ligit airforce valve.
I have an old Condor (or Talon, I can't recall) - originally it was only shooting at about 850 fps with 18 grains, and the power wheel at max. With a heavier hammer I could shoot with higher PSI in the tank but it still wasn't much more powerful. With a hi-flow valve I can easily get over 1,100 fps if I turn up the power wheel.
Upvote 0