Help texan lss cf .50

[FranciscoSV]

Hola grupo Soy nuevo en este mundo del big bore, no hablo ingles pero intentare explicarme lo mejor posible.
Hace poco compre una texan lss cf .50 con slug de 368 grains, la compre pensando en cazar jabalíes.
mis dudas son las siguientes:
debo modificar algo antes de cazar? ej: aumentar la potencia para ese tipo de slug, entiendo que la potencia se puede modificar en el costado del rifle, pero como saber cual es la potencia necesaria o cuantas vueltas darle al aparato. (Adjunto una foto para que vean a lo que me refiero)

A cuantos psi debo hacer el ultimo tiro para que sea efectivo? ej: de 3620 psi a 2500 o de 3620 a 2000.

Espero que me puedan ayudar soy de Chile y aquí no hay información sobre estas armas.

 

[FranciscoSV]

hello group. I am new in this world of the big bore, I do not speak English but I will try to explain myself as best as possible.
I recently bought a texan lss cf .50 with a 368 grain slug, I bought it thinking of hunting wild boar.
my doubts are the following:
should I modify something before hunting? eg: increase the power for that type of slug, I understand that the power can be modified on the side of the rifle, but how to know what the necessary power is or how many turns to give the device. (I attached a photo so you can see what I mean)

How many psi should I make the last shot for it to be effective? ex: from 3620 psi to 2500 or from 3620 to 2000.

I hope you can help me I'm from Chile and there is no information here regarding these weapons.

 

[RM.510bigbore]

hello group. I am new in this world of the big bore, I do not speak English but I will try to explain myself as best as possible.
I recently bought a texan lss cf .50 with a 368 grain slug, I bought it thinking of hunting wild boar.
my doubts are the following:
should I modify something before hunting? eg: increase the power for that type of slug, I understand that the power can be modified on the side of the rifle, but how to know what the necessary power is or how many turns to give the device. (I attached a photo so you can see what I mean)

How many psi should I make the last shot for it to be effective? ex: from 3620 psi to 2500 or from 3620 to 2000.

I hope you can help me I'm from Chile and there is no information here regarding these weapons.

I've shot my 50 texan Cf a ton. That is still a light slug for your .510. At 3625 psi and the hammer spring adjustment backed all the towards the trigger gaurd . You can run all .510 fro. 300 grain to 650 without a problem. My Texan will run .510 460 grains at 860 fps. What ever you do don't run the pressure too low on the Tx2 valve. I would never shoot more than 5 shots off that tank. If pressure to low a piece of the valve falls out and you have to get a new one from Airforce

 

[RM.510bigbore]

The 50 sucks a ton of air . Keep the barrel clean any leading will make your accuracy hell. If buying molds to cast I would buy .513 or .512 diameter and size to .510. The $25.00 Lee double cavity .515 450 grain mold sized to .510 is a good solid hunting slug for the 50. I'd stay from hollow points. They kill but I mean zero blood trail . ask anything if I can help.I will

 

[FranciscoSV]

Thank you very much for your help. As I understand it, he advises me to move the power regulator down to the end or I misunderstood, apparently it is at the minimum, it currently spends 300psi per shot and I never lower it more than 2500 psi. Could you share a photo of your power regulator to see if it has any point or a mark that serves as a guide.


Thank you and sorry for the inconvenience. I really don't know where else to get information about this weapon in my country or in forums in Spanish.