Tuning help with condor update

[wethy]

My friend ordered in some parts fromTalon Tunes to quiet his Condor. Two of them are a quick change top hat and a hammer w/slap mod. Does anyone know where there's a video or instructions to put these in? I heard Talon has some helpful videos but they haven't gotten back with me yet. we're kinda clueless. I'm sure we can get the moderator on lol thanks

JPW

 

[MrP]

To put in the hammer you need to remove the barrel. Unscrew the the grub screws that hold the barre and end cap and it pops out easily. Look for "changing barrel airforce condor" on YouTube. This will show you how to get to where the hammer is.

top hat I haven't messed with 

 

[davecole]

I did this video for a member a while back. Hope it helps.

https://youtu.be/jPEZxP8Zajk

 

[kkarmical]

Remove the air tank I use a vise to grip the tank, tophat pops right out by using 2 screwdrivers one each side under the tophat, then applying pressure equally gently pry it out.

While the 2 screwdrivers work, its easier using a car interior panel removal tool like the one pictured, then you can hold the tank with one hand, then use the tool to pry out the tophat. I use one from harbor frieght.

New tophat replaces the one you just removed, just a little silicone on the tip of the tophat, just get it started by inserting it in place, then install the air tank and cock and dry fire until its shooting.