G
Guest
Guest
I have a hill 4 with the dryer does anyone have a dryer on the outgoing air to the gun ? because i am not sure but the filter is on the intake side in my eyes
Same here, I think the moisture issue with hand pumps sometimes gets blown out of proportion. I'm sure there have been some cases of water getting in a gun from using a hand pump but I have never seen a drop in any of mine.
Upvote 0
I have a Hill Mk 3 pump and the intake filter dryer and never had any moisture in my guns. I am in the south where we have high humidity. I only pump up gun indoors in air conditioned space. When done I put filter in a quart freezer bag and get all the air out of it so no asorbison of moisture out of air when not in use. If you have a drier on the high side that is a lot of cubic inches to fill up and would significantly increase the space to fill with a pump and that is a lot of extra work in my opinion.I done this until I got my CF tank a couple years ago. Hope this helps. MM
Upvote 0
using any dryer on the outgoing air to the gun will increase the pumping time so it's not recommended unless you are physically very fit.
Upvote 0