The only thing I give is advice. Of course, others are free to do as they desire. I just hate for anyone not to benefit from their work, as poverty is the enemy of us all.
Upvote 0
Homebrew FX Chrony display
- Thread starter DaystateRebel
- Start date
Hi,
thanks for your answer, it was all my fault... my mistake in loading the libraries, now everything is fine. I thank you for your availability.
A greeting
thanks for your answer, it was all my fault... my mistake in loading the libraries, now everything is fine. I thank you for your availability.
A greeting
Upvote 0
@DaystateRebel
I was thinking that the name “profile” is misleading… in reality in the Fx app we choose the sensitivity range to better the precision of the measure.
So the perfect solution in the menu would be:
1 - choose sensitivity range
2 - choose pellet weight
And those will show up instead of the word CONNECTED
I was thinking that the name “profile” is misleading… in reality in the Fx app we choose the sensitivity range to better the precision of the measure.
So the perfect solution in the menu would be:
1 - choose sensitivity range
2 - choose pellet weight
And those will show up instead of the word CONNECTED
Upvote 0
Good to hear that, want to do it again?
New Heltec sketch is available, now includes energy calculations and user defined pellets. At the top of the sketch (starts at line 20) you can define the pellets you want to use in a little table. Here you input following
Pellet name,
Pellet manufacturer,
Weight in grains,
Caliber in inches,
Weight in grams,
Caliber in mm
You get a maximum of 256 pellet types and the pellet name must be shorter than 256 characters.
(NOTE: You must have at least one pellet defined)
There is a new menu item that allows you to select the pellet you want to use, the pellet energy is calculated and displayed along with the speed
Upvote 0
I agree, profile isn't the right name.
I propose to create a gun profile, that will have a name, speed range (formerly profile), minimum return and a list of pellets from the pellet list I introduced today. Just like today's update, you'll need to edit the sketch and upload it.
I know there's many better ways to do this (apps, config files etc etc) and it's a pain in the wotsits but I actively want people to have to build the sketch and load it themselves. For reasons
Hopefully those of you have already done it will help others achieveUpvote 0
Excellent upgrade, and I totally agree with your line of thinking.I know there's many better ways to do this (apps, config files etc etc) and it's a pain in the wotsits but I actively want people to have to build the sketch and load it themselves. For reasons
Thanks for your work.
Upvote 0
Thanks for doing this @DaystateRebel - I'm trying to figure out how to save/send (email) a shot string.
I'll be getting a Heltec pretty soon and hope to get it set up.
Thank you again for everything.
Upvote 0
I like that M5Stack Core 32. May cost $50 or so but more inline with what I'll probably play with.
I'm owed nearly $2000 and waiting for that to order.
I'm owed nearly $2000 and waiting for that to order.
Upvote 0
I placed the order a couple days ago, will see if it's shipped or not. I mentioned the TTGO display earlier in this thread, but it wasn't supported at the time so I ignored it.
Upvote 0
I was trying the last update but in the board the only choices are the ones you coded.
The pellet I added to the code does not show up.
What have I done wrong?
The pellet I added to the code does not show up.
What have I done wrong?
Upvote 0
It helps if you show your additions in code so it can be compaired to before what you added.
Upvote 0
Just the two lines for the pellets definition, not added but modified the existing ones to my data.
This is the original code
This is the original code
Upvote 0
Your changes to the code.
It's very easy to screw code so just asking for the examples to look at.
It's very easy to screw code so just asking for the examples to look at.
Upvote 0
Sorry, I didn't explain it very well. You can add / delete rows to that table (minimum 1 and maximum 256 rows). Every row, except the last one, must end in a comma. If your only interested in Metric or Imperial measures you can leave the others at 0 - here I skip the metric values for the NSA Slugs
Upvote 0
Is there a Rule for spaceing between values?
I know some programs I write in those values must be declared as far as spaceing.
I know some programs I write in those values must be declared as far as spaceing.
Upvote 0
Kind of figured that but never hurts to be sure.
I come from programming in C to C++ and using indentation to help follow coding.
I come from programming in C to C++ and using indentation to help follow coding.
Upvote 0