I want to change the hose on this valve for a male quick connect What type of male quick connect do I need? Can I use the one in pic below with no type of restrictor on it?
Hose replace with quick connect
- Thread starter Poke-E
- Start date
Great valve BTW
Gurlleu Universal 1/8 BSPP to 8MM Quick-Disconnect Connector Stainless Steel Adapter with Sealing Gasket https://www.amazon.com/dp/B07WG76MCL?psc=1&ref_=cm_sw_r_apin_ct_XZQPDCSZ9ZNA5F4VYNFV&language=en_US
Gurlleu Universal 1/8 BSPP to 8MM Quick-Disconnect Connector Stainless Steel Adapter with Sealing Gasket https://www.amazon.com/dp/B07WG76MCL?psc=1&ref_=cm_sw_r_apin_ct_XZQPDCSZ9ZNA5F4VYNFV&language=en_US
Upvote 0
The one you show is a male foster with male threads. You need to find a male foster with female threads to attach to the male thread on end of fill hose. Here's an example (or, did you mean at the TANK, not the end of fill hose? If so, you've got the right idea)
Air Venturi Male Quick-Disconnect, 1/8 BSPP Female Threads, Steel, Rated to 5000 PSI, Incl. Delrin Seal https://a.co/d/c7mEmnw
Air Venturi Male Quick-Disconnect, 1/8 BSPP Female Threads, Steel, Rated to 5000 PSI, Incl. Delrin Seal https://a.co/d/c7mEmnw
Last edited:
Upvote 0
For that to work, you would need a hose with 2 females(to use on a gun). Then you risk mixing up fill port with air outlet port.
Upvote 0