FX How does the FX Panthera/Dynamic plenum work ?

[Jez]

As the above question, I know the plenum is placed around the barrel for efficiency but is there a cutaway drawing to show layout, I can't figure out how it works with just one regulator, that is is presuming that the plenum is pre-charged from the bottle then released through the transfer port. There is a bit going on so is there someone who can explain the mechanics. Many thank and hope this does not appear a stupid question

 

[Jez]

Just bumping this, in case someone might have missed it and knew something on the subject

 

[SilentSquirrel]

following with great interest

 

[Jez]

following with great interest

Thanks Squirrel was getting a bit "Billy no mates" and begining to think it was a daft question but think the there is definitely a bit of a lack of understanding how this system works, though there would have been a cutaway drawing of how it is layed out. Other than taking my rifle to bits which I am not going to do. I have learnt that the barrel system, the liner "carrier" is 14mm od and appears to be based / the same as existing dreamline/ impact configuration but a different breach attachment but same thread ?

 

[Mr.H]

Have you looked over on FX website for a schematic? Look up "support" and then there's a tab for "downloads"

 

[Mcleod]

Check out this thread. It may show what your asking about.

FX Impact scan

Impressive!!! what software did you use?

www.airgunnation.com

 

[Jez]

Something like the above but pertaining to the FX Panthera would be useful.

 

[GA_LeadHead]

Something like the above but pertaining to the FX Panthera would be useful.

Here you go:

https://fxairguns.com/wp-content/uploads/2023/02/Panthera.pdf

 

[Jez]

Yes, got that but would be great to have an internal diagram showing passageways/ flow of high pressure air etc.

 

[rcarlisle]

Is this what you're looking for? Same thread as posted above, but later page.

FX Impact scan

Impressive!!! what software did you use?

www.airgunnation.com

 

[Jez]

This is great, thank you rcarlisle this exactly what I was looking for. Very grateful , I apologise for not looking deeper into the thread

 

[shelly_25]

Glad to see my drawings are being used to help others.

 

[csdilligaf]

I love seeing the inner workings of airguns. They sure have got more complicated over the years.